| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $25.92 | $25.39 | $24.60 | $23.54 | Contact US |
1W 48CH 5.8G TX RX FPV Video Transmitter Receiver (w/ EWRF 5.8G OTG Receiver for Android Cellphone)
$73.03
1W 48CH 5.8G TX RX FPV Video Transmitter Receiver (with 5.8G FPV Receiver for Cellphone & PC)
$71.32
1W 48CH 5.8G FPV Camera VTX Combo FPV Camera and VTX (with Lollipop Antenna & without Receiver)
$44.86
Happymodel Diamond VTX 5.8GHz 40CH 25mW-200mW Switchable VTX with DVR 1280x720
Specifications:
- Brand: Happymodel
- Output Power: 25~200mw Switchable
- Frequency: 40CH
- Input Voltage: 3.3V-5.5V
- Current Consumption: 250mA~510mA(Typical)
- Antenna: RG178 Antenna
- U.FL interface
- Frequency: 5.8GHz, 5 Frequency Bands & 40 Channels
- Support Raceband
- Support Smartaudio
- Weight: 3g without the weight of antenna
- Video Output Size: VGA (640x480)
- Video Output Format: NTSC
- Recording Video Resolution: 1280x720 @25FPS
- Support TF Card: Max.32G
- Interfaces:
JST SH1.0 3-pin for Camera
JST SH1.0 5-pin for Connection with F3/F4 Flight Controller
- Compress Format: AVI
Features:
- Short press Start/Stop button to start or stop video recording
- Videos will automatically stored in every 2 minutes
- Best for upgrading Mobula7 / Eachine Trashcan
- Compact size and it only weighs 3g
- Easy to mount in a regular whoop drone
- Built-in DVR(Video resolution 1280x720)
- Automatically start to work when it is powered on
Note: It does not support auto saving when it is powered off. Please remember to press the Stop button to save record after landing.
Package Included:
- 1 x Diamond VTX
- 1 x JST SH1.0 3-Pin Cable for Camera
- 1 x JST SH1.0 5-Pin Cable for Flight Controller
Recommended Parts to Fit the Diamond VTX (Not Included)
- Happymodel Mobula7 V2 Canopy
- CADDX EOS2 Camera
- Runcam Nano2 Camera
Firmware for Happymodel Diamond VTX:
http://www.happymodel.cn/index.php/2019/07/13/firmware-for-happymodel-diamond_vtx/
