Tags: Hart475
Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $273.37 | $267.79 | $259.42 | $248.27 | Contact US |
Hart475 Handheld Communicator Device HART Lattice LCD display Advanced HART375
Product Description:
- HART475 communication device is the advanced HART375,
- It can communication 1151,3051,EJA,ABB and other HART protocol input instruction ,
- It completely compatible with the domestic intelligent pressure (temperature) transmitter,meanwhile,it can operate operation with electromagnetic flowmeter, V cone flowmeter, target flowmeter, vortex flowmeter flowmeters that support HART protocol.
- It can monitor the input/output value and the auto diagnosis result.When the system is boot up or maintain operation,merely connect the HART communicator to the 4~20mA communication wire,then you can use it.
Characteristics:
- On-line monitoring and communications,4 to 20mA DC signals are not interrupted by the modulation signal.
- It can share HART communication protocol,It can also use HART protocol to share Hart.
- Easy to use large screen (184 lines, each line of characters), Chinese display, users see clearly,easy to change
The protection of self diagnostic function:
- Full function: supports HART communication protocol for traffic flow, temperature, meter, transmitter
- Large screen display interface: display bigger and clearer, use imported LCD screen
- HART intelligent equipment and production tests, diagnostic tests
- Hart can be used for smart device configuration, calibration, maintenance, diagnostics, monitoring, etc..
- The field of acquiring information; instrument manufacturer Hart
- HART instrument including working status and fault information
- Read rice output current and process variables
- Parameters obtained and output values of sensors
- Self-test function
- Format password protection
- Low voltage alarm display
Product Specification:
- Communication signal connection:Special cable,1.1m(3.6ff)
- Communication wire:1km (0.62 mile) (0.75~1.25mm2)
- Load resistance:250ohm~600ohm
- Load capacitance :<0.22uF
- Load Sensor:<3.3mH,connection distance:>15cm (avoid parallel routing)
- Display:128x64 lattice LCD display
- Control:Touch switch(4pcs direction key,16 function key,1pcs power switch)
Standard technical specification:
- Technical specifications: rosemount1151 equipment, rosemount3051abb, Henghe EJA, Fuji (HART communication protocol) and other imported pressure transmitters, 1151 3351hk1151, DS, DS, hk3151 and other household intelligent pressure transmitters
- Connection: special communication signal cable, 1.1 meters (3.6ft) communication line: length: km (0.62 miles) (0.75 ~ 1.25mm2) load resistance: - 250 ~ 600 load: 0.22 UF inductance: the following 3.3mh spacing and power line: more than 15 cm (avoid parallel lines): 128 * 64 dot matrix liquid crystal display controller. Touch switch (416 key and function key, power switch)
- Function description / basic function:Together, and display different parameters of change, HART communication
- Constant output current
- Added function: Zero
- You need a password protected format format
- LCD battery alarm, alarm information can show that the battery voltage is low
- LCD contrast adjustment conditions, normal working environment temperature: 15~55 degrees, storage conditions: ambient temperature: 0~50
Package List:
- 1 x Hart Field Communicator
- 1 x 250ohm resistor
- 1 x Charger
- 1 x Communication cable
- 1 x Operation Manual
- 1 x Carrying case