| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $56.45 | $55.30 | $53.57 | $51.26 | Contact US |
RideNow R1 100PSI Mini Electric Air Pump Electric Bicycle Pump Bike Pump for 7.4V Fast Inflation
$60.02
RideNow R1 S 120PSI Mini Electric Air Pump Bike Pump with Air Pressure Display + 7.4V for Inflation
$81.78
RideNow R1 MAX 150PSI Mini Electric Air Pump with Preset Tire Pressure + Display + 11V Inflation
$83.72
HB-83 Brushless Wheel Hub Motor 55KG Load 24V/36V High Power Scooter Motor Scooter Accessories
Specifications:
- Motor model: HB-83
- Rated voltage: 24V/36V
- Rated power: 260W/350W
- No-load current: less than 1A
- Rated current: 10A
- Rated torque: 1.3N.m
- No-load speed: 24V 1800 rpm; 36V 2700 rpm
- Number of pole pairs: 14
- Motor weight: 765g
- The motor comes with Hall sensor
- Waterproof rating: IP44
- No-load noise: 55d
- Application areas: electric scooters, robots, intelligent hardware equipment, mechanical intelligent mobile modification fields, etc.
Package Included:
- 1 x Wheel Hub Motor
Note:
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!
Motor Hall Introduction:
- Motor Phase Cable: U-thick red wire; V-thick black wire; W-thick blue wire
- Hall Cable: 5V-thin red wire; negative-thin black wire; U-thin white wire; V-thin yellow wire; W-thin orange wire
Attention:
The above is the reference data for the test on the conventional road surface with slope less than 5 degrees with motor wheels installed
Precautions For Motor Selection:
A. The motor load weight listed in the above figure refers to the use of 1, 2, and 4 motors as the driving wheels of the carrier. When the carrier starts at a standstill, the speed control accelerator (push rod or knob) is added to maximum, the maximum weight that can be driven on the carrier.
B. The following two ways of using will make the motor power smaller:
1. When the motor is running at a reduced speed, the lower the speed, the smaller the force. This motor is not suitable for operating scenarios below 4km/h.
2. When the motor is used in a larger wheel, due to the principle of leverage, the larger the diameter of the outer wheel, the smaller the motor force.
C. For modification purposes in other fields, due to different performance requirements such as force method, resistance, torque, etc., please communicate with customer service before placing an order.
