HeliBEST MCX3V5 Carbon Fiber 2-Axis Camera Gimbal for Multicopter Aerial Photography MC6500Pro V5.0

HeliBEST MCX3V5 Carbon Fiber 2-Axis Camera Gimbal for Multicopter Aerial Photography MC6500Pro V5.0

Deacription:
- MCX3V5 two-axis aerial PTZ specifically designed for aerial enthusiasts,especially suitable for XAircraft 650V4/V8/Pro, also can be used with Sigma SS4/SS6 multi-axis aircraft. Compared with the previous generation, rack rigidity has increased substantially on MCX3V5, both in carbon fiber or fiberglass, MCX3V5 have excellent structural strength.
- MCX3V5 new version DCS2600Digi is a new generation of titanium metal PTZ dedicated digital servo high refresh rate, smooth operation , refresh rate up to 400Hz. The steering gear DCS2600Digi has been the core driver of the MC Series PTZ. In the titanium gear DCS2600Digi steering gear has enough powerful driving force, the complete elimination sweep gear to happen. Very sophisticated gear with the gear dummy bit the DCS2600Digi steering gear almost negligible extent.
- Stability augmentation system comes with optional flight control PTZ augmentation, you can choose a separate PTZ controller, such as: ZYX-GS or XCAM. MCX3V5 great support SONY NEX 5/7 micro-camera, the GoPro 1/2/3 and the Olympus E-M5 micro-camera. For the most commonly used NEX series micro-camera, suitable lens options are available:
SELP1650 SEL16F28 and SEL16F28 + the VCL-ECU1 ,SELP1650 lens with OOS optical image stabilization function is the most worthy recommendation lens.

Features:
- PTZ rigid substantial increase
- Roll arm with aluminum pillar reinforcement
- Pitch axis Servo direct drive, travel, lens ok to vertically toward the ground
- Roll arm using a three-link control, even force, the virtual bit smaller
- Roll arm with three dampers, stabilizer damper damping adjustable
- All the steering gear upgraded to titanium metal gear
- Better camera center of gravity position
- Can be upgraded to work together with strengthen fixed camera frame
- great to work together with ANTI-Q2000S
- XAircraft X650 series aircraft original bit docking
- Support for flight control augmentation and independent PTZ controller
- Dedicated servo DCS2600Digi supports 400Hz ultra-high refresh rate
- Light weight, carbon fiber version with steering gear only 152g

Specifications :
- Weight: 101g (glass fiber version)
- Inner frame effective width: 133mm
- The total depth of the inner frame: 66mm
- The effective depth of the inner frame: 57mm
- Dimensions: 184mm (W) x 100mm (D) x 107mm (H)
- Roll angle: 40 degrees
- Pitch angle:> 100 degrees
- Maximum load: <800g

Package including:
- 1x MCX3V5 camera gimbal kit only
- 4x dedicated roll damping
- 3x steering gear linkage
- 6x ball head + ball head buckle
- 2x Rubber VR tube
- 4x O ring
- 4x nylon screws + nuts
- 10x M2 socket head cap screws

User Manual Download:  MCX3V5

Test Video: