• HF2411 4G DTU Module RS232/485 to 4G/3G/GPRS IoT Communications Device 2411-cat1 Module
  • HF2411 4G DTU Module RS232/485 to 4G/3G/GPRS IoT Communications Device 2411-cat1 Module

HF2411 4G DTU Module RS232/485 to 4G/3G/GPRS IoT Communications Device 2411-cat1 Module

Availability: In stock, usually dispatched in 1 business day

  • Price:$47.20
  • Price in reward points: 472 Reward Points: 5
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $46.26 $45.31 $43.90 $42.01 Contact US
Quantity:

HF2411 4G DTU Module RS232/485 to 4G/3G/GPRS IoT Communications Device 2411-cat1 Module

Features:

- Support LTE-TDD, LTE-FDD, WCDMA, TD-SCDMA and GPRS
- Support RS232/RS485 to 2G/3G/4G Data Transmission, UART baud rate Up to 460800bps
- Supports Max 3 Channel TCP/UDP connections, Each Connection Supports 1400 Bytes of Data Cache
- Support Multiple Working Modes: Network Transparent Transmission Mode, HTTP Mode
- Support IOTService Tool, Remotely and Dynamically Modify Module Parameters
- Support SMS AT Command Configuration
- Supports Registration Packet, Heartbeat Packet Function, and Packet Supports Combination of ICCID, IMEI, IMSI, Software Version, GPRS Connection Status.
- Support NTP
- Support for Modbus TCP to Modbus RTU
- Support IOTBridge for Remote Control and Configuration
- Support IOTBridge Working Time Setting, For Example, Only Works From 10:00 to 10:30 to Save the Data Traffic
- Support for UART, Network OTA Upgrade Firmware
- Size: 95 x 65 x 25mm/3.7 x 2.6 x 1"
- 9 to 36VDC Wide Power Supply

Specifications:
System Information:
- Processor: for Cortex-M3
- Basic Frequency: 96MHz
- Operating System: for FreeRTOS

4G Interface:
- Transmit power: LTE-TDD: Class3 (23dBm+1/-3dB), LTE-FDD: Class3 (23dBm±2dB)
- Receiving Sensitivity: FDD B1: -99dBm (10M); FDD B3: -98dBm (10M); FDD B5: -99dBm (10M); FDD B8: -98dBm (10M); TDD B38: -98dBm (10M); TDD B39 : -98dBm (10M); TDD B40: -98dBm (10M); TDD B41: -98dBm (10M)
- LTE: LTE-TDD: Uplink and downlink ratio 2: max. 8Mbps (DL) / max. 2Mbps (UL); uplink and downlink ratio 1: max. 6Mbps (DL) / max. 4Mbps (UL). LTE-FDD: max. 10Mbps (DL ) / max 5Mbps (UL)

Serial Port:
- Number of ports: 1
- Interface standard: RS232: Immersion gold male DB9 connector, RS485: 5.08mm terminal (only one of the two serial port types of RS232/RS485 can be selected for communication)
- Data bits: 7, 8
- Stop bits: 1, 2
- Check Digit: None, Even, Odd
- Baud rate: TTL: 1200bps~460800bps
- Flow Control: No flow control, half duplex (RS485), hardware RTS/CTS, DSR/DTR (RS232)

Software:
- Configuration method: serial AT command, IOTService serial configuration software, IOTService network configuration software
- Firmware upgrade: serial or OTA upgrade

Basic Parameters:
- SIM card slot: standard larger bigger one (1.8V/3V)
- Size: 95 x 65 x 25mm/3.7 x 2.6 x 1"
- Working temperature: -40 to 70℃
- Storage environment: -45 to 105℃, 5~95%RH (no condensation)
- Input voltage: 9~36VDC
- Operating current: ~300mA at 9V

Package Included:
- 1 x HF2411 4G DTU
- 1 x 4G Suction Cup Antenna
- 1 x 12V Power Adapter



HF2411 Sub Model Specification:
For different countries, there are different 4G network, so before place order, you must check the network first. If the network is suitable, then choose of the right sub model.


Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha