| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $48.22 | $47.23 | $45.76 | $43.79 | Contact US |
HF2411 IoT Communication DTU Module RS232/485 to 4G Data Transmission Unit with Sucker Antenna and 12V Power Adapter
$51.14
YK-1000H International Version NTP Server Network Time Server Support Time Zone Selection with 10m Antenna for GPS Beidou
$94.46
MA-902 Gigabit Network Time Server Support Multi-mode Satellite (1 Gigabit Port + 30m Mushroom Antenna + Rubidium Atomic Clock)
$3,121.62
HF2411 IoT Communication DTU Module RS232/485 to 4G Data Transmission Unit with Sucker Antenna
Description:
- The HF2411 support for LTE-TDD, LTE-FDD, WCDMA, TD-SCDMA, GPRS full network. 4G network support maximum download data rate 150Mbps, upload data rate 50Mbps.
- The HF2411 support for TCPIP protocol, with its RS232/RS485 interface, it make traditional UART device easy connecting.
Features:
- Support for LTE-TDD, LTE-FDD, WCDMA, TD-SCDMA, GPRS.
- Support for RS232/RS485 to 2G/3G/4G data transmission, UART baud rate up to 460800bps.
- Supports up to 3 channels TCP/UDP connections, each connection supports 1400 bytes of data cache.
- Support multiple working modes: network transparent transmission mode, HTTP mode.
- Support for IOTService Tool, remotely and dynamically modify module parameters.
- Support SMS AT command configuration.
- Supports registration packet, heartbeat packet function, and packet supports combination of ICCID, IMEI, IMSI, software version, GPRS connection status.
- Support for NTP.
- Support for Modbus TCP to Modbus RTU.
- Support for IOTBridge for remote control and config.
- Support for IOTBridge working time setting, for example, only works from 10:00 to 10:30 to save the data traffic.
- Support for UART, network OTA upgrade firmware.
- Size: 95 x 65 x 25mm.
- 9~36VDC wide power supply.
Package Included:
- 1 x DTU Module
- 1 x Sucker Antenna
