High Power 10W 2.4G to 1.3G Strengthen Repeater Wireless Transmission Signal Transfer Device Audio Vdeo Transceiver

High Power 10W 2.4G to 1.3G Strengthen Repeater Wireless Transmission Signal Transfer Device Audio Vdeo Transceiver

Function:
- High frequency, good anti-interference performance.
- Using the new circuit, the new structure design, ensure that the image is clear.
- Many available channels, and each channel is not easy to generate mutual interference.
- With application of extended functions, adaptability is strong.
- With relay signal transmission, to extend the receiving distance.
- This product is used in the case of wireless signal needs to strengthen!

Technology index:
- Receiving frequency 1.3G
- Transfer device to turn out frequency 1.3G
- Transmit power: 10W signal enhancement
- Channel: 8 channels, 4 channels in the back end
- Can transmit video signal: PAL/NTSC
- Video input impedance: 75Ohm
- Power adapter: 12V/ 1A for transmitter; receiver using 12V/1A
- Relay size: 185X55X20mm
- Weight: 400g
- No transmitter

Installation:
1 "Wireless signal repeater " is a wireless signal relay.
2 "Receiver" as the image receiver.
3 Install the antenna, and the antenna set up.
4 Link receiver's video to TV's or monitor's video, and select the channel.
5 Install the antenna transmitter and connect the power source.
6 Search 2.4G image signal, the image is clear after letting go.
7 If the image is darker or brighter with a small screwdriver adjustment transfer device side small circular knob for adjusting the brightness.
8 Converter and receiver are installed, observe the effect of receiving, by adjusting the antenna angle until the image reaches the best.

Packing list:
- 1 x Relay
- 1 x 1.3G receiver
- 1 x 2.4G omni directional antenna
- 2 x 1.3G omni directional antenna
- 2 x Power adapter: 12V
- 1 x Manual
- 1 x AV line