High Torque Metal Servo 180kg.cm 12V-24V for Large Robot Mechanical Arm Magnetic Induction 180kg

High Torque Metal Servo 180kg.cm 12V-24V for Large Robot Mechanical Arm Magnetic Induction 180kg

Features:
- Stable performance and smooth operating
- Super strong anti-interference capacity
- Dual-mode high torque servo
- Can rotated and be used to position. 180kg makes it fit PTZ steering robots
- Digital servo with high sensitivity, large stroke and zero dead zone
- Perfect for uses with Futaba, JR, SANWA, Hitec and other remote control
- Unique power stabilization technology ensures that servos continue to work when the fuse is blown
- Servos work within the safe torque

Parameters:
- Working Frequency: 50Hz
- Operating Voltage: DC 12V to 24V (Suitable for voltage between 12V to 24V)
- No-Load Operating Current: <500mA
- Maximum Torque:
  180kg.cm (24V) (Measured value. Not theoretically calculated)
  1764N.cm (24V) (Measured value. Not theoretically calculated)
  90kg.cm (12V) (Measured value. Not theoretically calculated)
  882N.cm(12V) (Measured value. Not theoretically calculated)
- Angular Velocity: 0.5s/60°@24V. 1.0s/60° @12V
- Rotation Angle: Max. 270° (0 to 270° PWM 500-2500us adjustable)
- Input Mode:
  Pulse Signal: Support remote control, multi-way servo controller and MCU)
  Pulse Signal Input Range: 0.5ms-2.5ms for all multi-channel servo controller. 1ms-2ms for RC remote control, MCU programming, Arduino and the like.
  Voltage Signal Input Range: 0V to +5V
- Control Accuracy: 0.32°
- Gear Material: Steel
- Weight: 530g

More Details:
- Power Supply Input: 12V-24V DC (- end connects to negative electrode. + end connects to positive electrode).
- Motor Output: M- connects to motor -. M+ connects to motor +.
- Motor Speed Adjustment Input: Used to control servo's angular speed.
- Rotation Angle Adjustment Input: Used to control the rotation angle of the servo.
- Mode Selection: Jumper cap set pulse signal input angle control or 360° continuous rotation. PWM is the pulse signal input.
- Control mode: The angle input signal is PWM, and the potentiometer can be used to control the angular position of the motor's axle. The pulse width is between 0.5ms and 2.5ms or 1ms to 2ms.
- PWM Control Mode: The angle input signal is a digital square wave signal with a pulse width of 0.5ms-2.5ms or 1ms-2ms.

Package Included:
- 1 x High Torque Servo
- 1 x 20cm Signal Cable

Note:
- Servo plate is not included in the package. Please purchase separately.
- Please contact us for PDF instructions after purchasing. Thank you!

Installation: