HLT-D16 1600W Plastic Welder Gun Set Plastic Welding Kit For PVC Coiled Material Plastic Floor PEPP

HLT-D16 1600W Plastic Welder Gun Set Plastic Welding Kit For PVC Coiled Material Plastic Floor PEPP

Product Parameters:
- Model: HLT-D16
- Related Power: 1600W
- Frequency: 50/60Hz
- Temperature: 20-700℃
- Air flow: 13.8m³/h
- Product qualification: CE, RHOS
- Protection class: Double insulated
- Net weight: 1.2KG

Package Included (Kits 10):
(1) 1pc 1600W plastic welding gun
(2) 1pc 5mm round nozzle
(3) 1pc 20mm flat welding nozzle
(4) 1pc 40mm flat welding nozzle
(5) 1pc 40mm silicone hand pressure roller
(6) 1pc 5mm round speed welding nozzle
(7) 1pc 6*6*8mm triangular speed welding nozzle
(8) 1pc tacking nozzle
(9) 1pc heating element
(10) 1pc mica tube
(11) 1pair carbon brush
(12) 1pc user manual

Advantages of Welding Gun:
Our larger impeller blades are made of nylon66+40% glass fiber,it is really heat resistant material, it won't melt under high temperature of 180 degree, our larger impeller blades increase the transmission of air flow across the heating element, with a larger total volume of air (285 l/m). This speeds welding production times and welds up to a 2" wide seam with one pass.
 
The superior motor features high temperature bearings and carriers made from heat reducing alloys that disburse heat to keep the motor components cool. The machine balanced spindles reduces vibration resulting in the smoothest operating hand gun on the market today. As added safety precaution, HLTE has double insulated all wiring and added a third wire to the motor itself for grounding, further reducing the potential for electric shock.
 
The heating element use new ceramic material, nickel chrome wire.

Plastic Welding Gun Service Objects:
Welding plastic synthetic rubber, as phalt plates, tubes, profiles sealing tape, coating fabric, film, foam plastic, ceramic tiles and plastic flooring. Pairs of PVC, polyethylene, polypropylene, and modified bitumen membrane, plastic sheets and plastic coated and other materials can be welded.Practical application of plastic welding heat gun:
1. PVC, PP-R, PE plastic sheet, plastic pipes, plastic tanks, plastic fuel tanks and other processing, mineral water barrels, jerrican and other maintenance.
2. Plastic waterproof roof installation, repair.
3. Plastic floor welding and maintenance.
4. Large-scale advertising fabric welding and fixed, advertising paper removal.
5. Printing machine heating and drying.
6. For a small area of wood drying machines.
7. Fabrics flash, computer generated embroidery floss, plastic shrink film, food processing, animal hair, feather removal.
8. Car bumpers, plastic decorative edge maintenance.
9. Tarpaulin welding and maintenance.
10. Environmental protection, pharmaceuticals.
11. Highways, reservoirs, water-proof.
12. Electron fixed, circuit board welding.

FAQ:
Q: What's plastic welding?
A: Plastic welding also know as hot air welding, we use a hot air hand tool to produce a jet of hot air that softens both the parts to be joined and a plastic filler rod, all of which must be of the same or a very similar plastic. Welding PVC to acrylic is an exception to this rule. Hot air/gas welding is a common fabrication technique for manufacturing smaller items such as chemical tanks, water tanks, heat exchangers, and plumbing fittings. In the case of webs and films a filler rod may not be used. Two sheets of plastic are heated via a hot gas (or a heating element) and then rolled together. This is a quick welding process and can be performed continuously.

Cautions:
1) The voltage rating stated on the tool must correspond to line/mains voltage.
2) For personal protecting on the building site, we strongly recommend the tool be connected to a GFCI (Ground Fault Circuit Interrupter) or a RCCB (Residual Current Circuit Breaker).
3) The tool much be operated with supervision, heat can reach combustible materials which are out of sight.
4) Protect tools from damp and wet.