Holybro Kopis2 6S FPV Quadcopter BNF Drone w/ RunCam Robin Camera /Motor Flight Controller/Receiver

 Holybro Kopis2 6S FPV Quadcopter BNF Drone w/ RunCam Robin Camera TMOTOR 1750kv Motor Kakute F7 Flight Controller

Features

• 5mm full 3k carbon fiber twill
• Counter-sunk screws on base for great appearance and protection of battery against damage.
• KakuteF7 V1.5 flight controller with soft-mounted gyro for mechanical filtering of vibration. Means you can disable more software filters for best flight handling.
• Improved soft-mounting foam for KakuteF7 gives optimal balance of stiffness and damping for even better gyro performance than before!
• Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks.
• Atlatl HV V2 video transmitter:
  • 5.8 GHz
  • Standard 40-channel set. However 5645 MHz and 5925 MHz  5945 MHz are illegal in many areas, so they are not supported. If you select one of these channels, it will simply fail to work.
  • Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
  • MMCX antenna connector for easy, secure connection. Won't break or come loose like the IPEX connector used on other vTX.
  • Control the vTX channel and transmit power from the OSD using your transmitter sticks or from your Transmitter. No more picking up the quad to change vTX settings!
• Buzzer included.
• RunCam Robin FPV camera
• Adjustable camera uptilt from 0 degrees to 90 degrees.
• Serial receiver supported (SBUS, iBUS, Spektrum).

Specifications

• MCU: STM32F745VGT6 32-bit processor
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• TF card for Blackbox logging
• Tekko32F3 4-in-1 40A ESC
• Supports 4S-6S battery
• Weight 325 grams without battery or props

Includes:

Manual:
Holybro_Kopis2_6S_Manual.pdf