HS14154043D2 1.4GHz 20W 8-24V Bidirectional Power Amplifier Module for Wireless RF Transmission

HS14154043D2 1.4GHz 20W 8-24V Bidirectional Power Amplifier Module for Wireless RF Transmission

Description:
- This product is a bidirectional power amplifier developed specifically for the 1.4GHz frequency band and complies with wireless radio transmission standards. This product is directly related to matching frequency extension techniques such as DSSS and OFDM. By adopting for Time Division Duplex (TDD) fast microwave detection technology and linear power amplifier technology, wireless RF communication distance can be greatly extended while ensuring the same transmission rate of wireless devices.

Specification:
- Working frequency band: 1.42 - 1.47GHz
- Working voltage: 8 - 24V (default 12V)
- Receiving gain: 10 - 25dB (default 18dB)
- Transmitting gain: 10 - 25dB (default 18dB)
- Input power range: 5 - 24dBm
- Maximum output power (P1dB): 20W (43dBm)
- EVM: 5% at 37dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
- Working current: 1800mA at Pout 37dBm 12V
- Noise ratio: ≤3.0dB
- Transmission delay: ≤1us
- Working temperature: -20℃ ~ 60℃
- Product size: 118 x 59 x 17mm
- RF interface: SMA female connector for input; RP-SMA-J for output
- Power supply interface: 6.0 x 2.0mm DC interface
- Net weight: 0.19kg

Application:
- 1.4G wireless LAN access point, client
- Based on 1.4GHz navigation system
- Based on 1.4GHz IoT transmission
- 1.4G drone remote control, image transmission

Precaution:
- Requires a power supply capacity of 12V/5A or 60W or above.
- If the output power is greater than 5W or above, it is recommended to enhance the heat dissipation treatment, such as adding heat sinks or fans.
- When connecting, you must first screw on the antenna, then connect the front-end source device, and finally supply power.

Package Included:
- 1 x Amplifier Module