| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $22.92 | $22.45 | $21.75 | $20.82 | Contact US |
T13-750W-12-H Single Phase Frequency Converter for 220V Single-phase Input & 220V Three-phase Output
$35.87
Original WFS3-40P415 Fork Sensor 6043919 New High Quality Label Sensor for SICK Industrial Use
$66.23
WF2-40B410 6028428 Original Label Sensor New Fork Sensor Detection Sensor for SICK Industrial Use
$95.38
HT04T2M Wire Terminal Block 4-Channel Differential To Collector Single Ended Module 12V Signal Input
Attention:
This product adopts push-pull output and can also be used for signal conversion. For example, NPN to PNP, PNP to NPN can also directly drive loads with high starting frequency. Loads should not exceed 0.6A.
Specifications:
- Model: HT04T2M
- Channel: 4 channels (each channel is an independent conversion channel, which can be disconnected if you don’t need it)
- Dimensions: 66 x 58 x 31mm/2.6 x 2.3 x 1.2"
- Power supply voltage: DC15-30V
- Input current: 4-20mA
- Peak output current: ±2.5A (maximum)
- Input signal: TTL/EIA422/423 differential signal, support single-ended, collector or differential DC3V-12V signal input (24V signal input is optional)
- Output signal: Y0, Y1, Y2, Y3 single-ended push-pull signal (compatible with high level and low level); PC interface supporting NPN/PNP/TTL/HTL input. The output voltage is the supply voltage. If 5V is required, a 2.2K-1/4W color ring resistor can be connected in series
- Conversion frequency: 0-2MHz
- Response speed: tpHL/tpLH=500ns (maximum)
- Working temperature: -40 to 100℃
Features:
- Push-pull output mode, supporting PLC interface with NPN or PNP input
- Built-in voltage conversion can output 5V, 100mA (maximum), and provide power for connected device module (disconnected when not in use)
- Convert differential output encoder signal to collector output signal, and then input it to PLC high-speed counting interface
- It can drive a load with frequent actions to output the peak current of ±2.5A (maximum), and it is recommended that load current does not exceed 0.6A
- Can be used for high-speed signal isolation, high-voltage isolation. The maximum allowable action insulation voltage is 890Vpk, and the maximum allowable overvoltage is 6000Vpk
- Typical application: The differential signal of servo encoder and grating electronic ruler can be converted into single-ended signal, and closed-loop control can be realized through the high-speed counting function of PLC of various brands. Suitable for ABB, Siemens, Mitsubishi, Omron, Panasonic, Delta, VIGOR, FATEK, Schneider, Xinje, Inovance and other brands PLC
- The product is small in size and compact in structure. Modular design makes it easy to install
Package Included:
- 1 x Set of Terminal Block
Note:
- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!
Function Introduction:
It can realize the conversion from 4ch differential signals to single-ended signals. It can convert the output differential signal of rotary encoder, grating ruler, magnetic grating ruler, servo driver, frequency converter, etc. into a single signal. This product can be used when your device (PLC, motion controller, etc.) does not have differential input function and needs to receive differential signals.
