iFlight BLITZ E80A 4-IN-1 Pro High Performance ESC 2-8S 48MHz G071 MCU Double Layer Heat Dissipation for FPV RC Drones

iFlight BLITZ E80A 4-IN-1 Pro High Performance ESC 2-8S 48MHz G071 MCU Double Layer Heat Dissipation for FPV RC Drones

Flight Controller:
Features:
- Improved circuit design, better components, and lower electrical noise!
- For DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
- 512MB Black Box
- With LC filter

Specification:
- Mount pattern: 35 x 35mm / 4mm PCB hole diameter
- For Smartaudio / IRC Tramp VTX protocol supported
- Firmware target: IFLIGHT_BLITZ_F7_PRO
- Input Voltage: 14.8V-34V (4S-8S LIPO)
- Motor outputs: 4x (SH1.25 connector)
- Flash: 512MB (Black box flash)
- I2C serial: SDA / SLA pads
- Dimensions: 41 x 41.5mm
- Barometer: DPS310
- OSD Chip: AT7456E
- LED controller: Yes
- MCU: STM32 F722
- Weight: 17g (±2)
- Beeper pad: Yes
- Gyro: BMI270
- UARTS: 4

Wiring Suggestion:
- UART1 for VTX HD/Analog
- UART2 for  Receiver
- UART4 for GPS
- UART5 for ESC Telemetry
- 8xDshot/PWM outputs
- 1xI2C for GPS Mag

Tips:
- F722 MCU has an inner inverter.
- SBUS, CRSF, ELRS, IBUS, DSM ETC... can be connected to any unused UART_RX, we suggest you connect to Uart_RX2.
- For Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1.
- F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2.
- Wiring diagram: https://drive.google.com/drive/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553

E80 4-IN-1 ESC:
Description:
- The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V.
- The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, combined with a three-in-one driver IC, achieves a faster running speed.

Features:
- Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection.
- G071 MCU, 48mHz maximum clock speed.
- TDK MLCC Low ESR ceramic capacitors.
- Top grade PSMN1R0-40YLD MOSFET.
- 8 layers double-sided PCB board.

Specification:
- Product Name: BLITZ E80 4-IN-1 ESC
- Input Voltage: 2-8S
- Max. Continuous Current: 80A
- Max. Burst Current: 100A
- MCU: G071
- BEC: No
- Firmware: BLHeli32
- Current Sensor: Yes
- Telemetry: Supported
- Target: IFLIGHT_BLITZ_G2
- Mounting Dimensions: 35 x 35mm/Φ4mm
- Dimensions: 35 x 42mm
- Weight: 65g (±10)
- Protocol: Supports for DShot DShot150/300/600/MultiShot/OneShot, etc.

Package Included:
- 1 x ESC

BLHeliSuite download (BL32): https://github.com/blheli-configurator/blheli-configurator/releases