| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $48.76 | $47.77 | $46.28 | $44.29 | Contact US |
ZM-3H2080 24V High Performance 3-Phase Stepper Motor Driver Controller AC80-220V for 86-130MM Stepper Motors
$166.32
ZM-3H2080 12V High Performance 3-Phase Stepper Motor Driver Controller AC80-220V for 86-130MM Stepper Motors
$166.32
ZM-3H2080 5V High Performance 3-Phase Stepper Motor Driver Controller AC80-220V for 86-130MM Stepper Motors
$166.32
Integrated Stepper Motor Driver Controller Touch-Screen Can/Modbus-rtu-232/485 Controller
Communication Version (Optional):
- 232 Communication Version
- 485 Communication Version
- CAN Communication Version
Parameters:
- Working Power: 9-40V DC (typical working voltage range 12-24V DC)
- The maximum output pulse frequency of the controller is 50KHZ
The maximum drive current of the driver is 4A; (suitable for 57 or 42 stepping motors below 1.8NM)
- The number of control axis: single axis, can be extended to 2 axis
- Analog input interface (can be connected to 10K adjustable resistor or input 0 - 10V voltage signal for speed regulation)
- 3-way digital output OC mode (output current 500mA, output low level);
- 5-way digital input (24V negative);
- Communication control (232/485 interface), open MODBUS-RTU protocol, external touch screen or PLC. Or CAN communication mode
- Direct drive stepper motor: 42-57 series (<=1.8NM)
Functions:
- Display: 2.4 inch LCD touch screen, simple operation.(It can display the current number of running times, the state of input and output, the state of the motor etc.)
- Auto Operation: store 1 program (Engineering) and edit 33 steps (segments) (no input instruction is required. Input the parameters directly. )
- Manual Operation: point operation, single running and data zero function.
- Parameter Settings: there are parameters such as direction, distance, speed, input, output, delay, cycle and so on.
- External digital input signal: Can be connected to external button or limit switch
- External digital output signal: can be connected to external relay to control external power and outage.
- Analog input signal: 1 way internal board 10K potentiometer, 1 way 10K potentiometer interface, 1 way 0 - 10V analog input interface, can be selected by the dial switch.
- Serial port /485 communication: realize Modbus-RTU function, use external device to control communication of this controller
Package Included:
- 1 x Stepper Motor Driver Controller
