Tags: JDS6600-60M
Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $110.57 | $108.32 | $104.93 | $100.42 | Contact US |
Product Description:JDS6600 series DDS signal generator can produce sine wave, square wave,triangular wave,pulse wave,arbitrary wave,frequency up to 60MHz;it has a frequency scanning, measuring signal frequency and counter functions,can simultaneously display the output signal,amplitude and frequency.The series has amplitude frequency characteristics,beautiful appearance;can be applied to factories, schools,research institutions and laboratories.
Model Introduction:
There are 5 models, JDS6600-60M,JDS6600-50M,MJDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the max output frequency of sin wave, as follows:
- Model:The max output frequency of sin wave
JDS6600-60M
Sine frequency range:0~60MHz
Square frequency range:0~15MHz
Triangle frequency range:0~15MHz
Pulse frequency range:0~6MHz
CMOS/TTL digital frequency range:0~6MHz
Square rise time:≤15nS
Pulse width adjustment range: 30nS-4000S
Mininum Frequency resolution:0.01µHz (0.00000001Hz)
Frequency accuracy:±20ppm
Frequency stability:±1ppm/3h
- Waveform Characteristics:
Waveform:Sine,Square, Triangle, Pulse (duty-cycle correction,Pulse width and cycle time adjustable),Partia Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder,Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, Sinc Pulse, Lorentz
Waveform length:2048 points
Waveform sampling rate:266MSa/s
Waveform vertical resolution:14bits
Sine:Harmonic suppression:≥45dBc(<1MHz);≥40dBc(1MHz~20MHz);Total harmonic distortion<0.8%(20Hz~20kHz,0dBm)
Square and Pulse:Overshoot (Square):≤5%;Duty-cycle range (Pulse):0.1%~99.9%
Ramp wave:Linearity:≥98%(0.01Hz~10kHz)
- Output Characteristics:
Amplitude range:30MHz<=Frequency 2mVpp~5Vpp
Amplitude resolution:1mV
Amplitude stability:±0.5%/5 h
Amplitude flatness:±5%(<10MHz); ±10%(>10MHz)
-Waveform Output
Output impedance:50Ω±10%(typical)
Protection:Short circuit 60S will not be damaged
- DC Offset
Offset adjusting range:0<Output amplitude≤0.4V,-0.25V~0.25V
Offset resolution:0.01 V
- Phase characteristic
Phase adjusting range:0~359.9o
Phase resolution:0.1o
- TTL/COMS Output
Low level:<0.3V
High level:1V~10V
Level rise/fall time:≤20ns
- External Measurement Function
Frequency meter function:Frequency measurement range:1Hz~100MHz
Measurement accuracy:Gate time continuously adjusted between 0.01S~10s
Counter function:Counting region:0-4294967295
Coupled mode:2kinds Coupling modes, DC and AC
Counting mode:Manual operation
Input signal voltage range:2Vpp~20Vpp
Pulse width measurement:0.01ns (resolution),20s (MAX measuring time)
Period measurement:0.01ns (resolution),20s (MAX measuring time)
- Sweep Function
Sweep channel:CH1 or CH2
Sweep type:linear sweep、log sweep
Sweep time:0.1s~999.9s
Setting range:Arbitrarily set between start point and stop points
Sweep direction:Forward, backward and round trip
- General technical parameters
Display:Display type:2.4 inch TFT color LCD
Storage and loading Quantity:100 groups
Location:00 to 99 (extract 00 place data at default boost state)
Arbitrary wave:quantity:1 to 60, totally 60 groups (default boost 15 groups)
Interface:Interface mode:USB to serial interface
Extension interface -:There is serial interface of TTL level mode to be convenient for secondary development.
Communication speed:Adopt standard 115200bps
communication protocol:Adopt command-line mode, open protocol
Power supply:Voltage range:DC5V±0.5V
manufacturing process:Surface-mount technology, large scale integrated circuit, high reliability, long service life
Warning tone:The user can set ON or OFF by procedure
Operating characteristics:Full button operation, knob continuous adjustment
Environmental conditions:Temperature:0~40oC,Humidity:<80%
Outer packaging dimension:240*210*95mm
Weight:980g
Package List:
- 1 x JDS6600-60M
- 1 x DC adapter
- 1 x USB cable
- 2 x Signal output cable
- 1 x User manual (PDF)
- 1 x CD