| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $37.96 | $37.18 | $36.02 | $34.47 | Contact US |
Nisi NM-200S 360° Fast Macro Focusing Rail Slider Aluminum Alloy Portable 20cm Gimbal Guide Rail
$127.77
Reflx Lab Simple Flash Small Camera Flash External Flash Compatible with Digital & Film Cameras
$42.69
Reflx Lab Display 1.54" E-ink Screen E-ink Display with Removable Magnetic Mount for Film Cameras
$46.57
L102 Photography Light Meter Exposure Meter Film Top Reflective Metering Support Hot Cold Shoe
Advantages:
- L102 camera light meter
- Small size, replaceable bottom shoes
- Button operation, automatic sleep
Parameters:
- Size: 27*30*13MM (main part)
- Metering angle: 32° (reflective)
- ISO: 6-6400
- Shutter: up to 1/2000
- Aperture: F1-F64
- Metering range: 2-18EV
- Exposure compensation: ±3 files
- Metering mode: aperture priority, shutter priority, EV value display
- Power supply: 160mAh for about 20 hours
- Charging: 5V/0.5A
- Shell material: nylon plastic shell
Package Included:
- 1 x Light Meter
Instructions:
1. It is recommended to charge before use.
2. The metering button can wake up the screen and perform a single metering. The flashing cursor indicates that the metering result is updated.
3. Pointing the cursor on the metering interface to the aperture means aperture priority, and pointing to the shutter means shutter priority. At this time, press the plus and minus keys to adjust the parameters of the corresponding mode. The metering result will follow. If you need to meter again, press the metering key again.
4. The setting button can switch the interface of ISO, metering mode, and exposure compensation.
5. When the metering data display exceeds the parameter range, it will prompt E.u.
6. The position of the cold shoe of the bottom cover is adjustable, but it is recommended to use
it after adjustment, so as not to loosen.
Attention:
Since this product adopts reflective metering, you should measure in the direction of the light when metering, and try to avoid backlight measurement. Backlight measurement can be carried out close to the object to be measured, it is recommended to add one or two levels of exposure to preserve the details of the dark parts when it cannot be close to the metering object. In the case of indoor metering, it is recommended to measure close to avoid interference from other light.
