LCD Digital Storage Oscilloscope 1M Bandwidth 20Mhz Sampling Rate w/Panel DIY Kit DSP 06204KP

LCD Digital Storage Oscilloscope 1M Bandwidth 20Mhz Sampling Rate w/Panel DIY Kit DSP 06204KP

Description:
This small, simple yet useful digital oscilloscope is capable to do 20Msps hardware equivalent-time sampling. It is totally MCU based, excellent as a educational/training project for students/hobbyists.

Specification:   
- The maximum equivalent sampling rate of 20MSa/s    
- The real-time sampling rate of 2Msps    
- Accuracy: 8Bit    
- Sampling buffer depth: 256 byte     
- Simulation of frequency band width:0- 1MHz    
- Vertical sensitivity:100mV/Div - 5V/Div (progressive by 1-2-5)    
- The vertical displacement is adjustable, with instructions    
- Input impedance 1M    
- Maximum input voltage: 50VpK (peak)    
- Coupling DC/AC    
- Horizontal sweep range: 0.2 s/Div - 10m (min) /Div (progressive by 1-2-5)    
- With automatic, conventional and single trigger mode, easy to collect transient waveform    
- Selection of internal / external trigger source    
- Available rising or falling edge trigger    
- Trigger level position can be adjusted, with instructions    
- Observable trigger before the wave (Fu Yanchi)    
- Trigger output, can be more than one oscilloscope connected in series to achieve the multichannel measurement, or other instrument used for synchronization.    
- May at any time to freeze the waveform display (HOLD)    
- With the 500Hz/5Vpp test signal    
- Can be stored up to 6 groups of waveform, the shutdown is not lost    
- Can facilitate the transfer of stored waveform display    
- The display screen in the form of graphics files sent through the serial port to the PC machine    
- Meter can measure frequency up to 5MHz frequency    

NOTE:
- Not include power supply.
- DIY Kit

Package Including:
- 1 X DSO062 oscilloscope Kit
- 1 X Probe