LeadShine MA860H 2/4 Phase Stepper Motor Drive Up to 80VAC/110VDC 7.2A for CNC Engraving Machine

LeadShine MA860H 2/4 Phase Stepper Motor Drive Up to 80VAC/110VDC 7.2A for CNC Engraving Machine

Feature:
- The MA860H is a high performance microstepping drive based on pure-sinusoidal current control technology.
- Owing to the above technology and the self-adjustment technology (self-adjust current control parameters)
- according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement
- and have better performances at higher speed than most of the drives in the markets. It is suitable for driving
- 2-phase and 4-phase hybrid stepping motors.

- High performance, cost-effective
- Supply voltage up to 80VAC or +110VDC
- Output current up to 7.2A
- Self-adjustment technology
- Pure-sinusoidal current control technology
- Pulse input frequency up to 300 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Short-voltage, over-voltage, over-current and short-cicuit protection