Little Bear G4 Tube Valve Guitar Bass Headphone Amplifier Drive Pedal Stomp U

Little Bear G4 Tube Valve Guitar Bass Headphone Amplifier Drive Pedal Stomp U

Product Description:
- This is tube + OP chip pedal.tube's function is amplifier and mixer the original signal. OP chip part function is  amplifier the current and output to headphone, work mode is: guitar or other pedal signal into this G4, through tube mixer and amplifier the signal (adjust the tone and gain), after output headphone amplifier part to gain current,then output to headphone. or throug the bypass switch output to other pedal make more effect .
- 3.5 jack converter function is for add an AUX input function.then you can input your MP3 or IPod to play back ground music,easy and useful.
- It's powered by 12~15Vac (400mA at least) or 12~15Vdc (250mA at least,polarity：outside:-, center:+ ).So,usually you could use it with most of your other pedal psu. and this list is not included any power supply for the pedal .all you get is just the pedal+tube only.
- There is a ON/OFF and BYPASS swtich on the TOP panel.you can easy to use them.

Parameters:
- Size:140*71*25cm(55*28*10 in),not included knob
- Weight:255g
- Headphone output power:100mW,work with 16~100 ohm headphone
- Power by: 2~15Vac (400mA at least) or 12~15Vdc ( 250mA at least,polarity：outside:-, center:+ ), DC - Jack size: 5.5/2.1 or 5.5/2.2
- Tube: 12AU7, you can repalcement other tube for make different sound tone
- Main function:clear warm and boost the sound,with headphone output. play in any time and Will not bother others
- Designed with 3 adjuster: Drive, tone, vol.

Note:about,the bypass mode. in bypass LED off mode.you can't use the volume function on G4, volume knob work for bypass LED on mode only.

Package included:
- 1 x Finished G4 tube pedal (without power adapter)
- 1 X 12AU7 Tube