Tags: EPX-10000, Metal Detector
| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $695.80 | $681.60 | $660.30 | $631.90 | Contact US |
M6T24 24-CH Serial Battery Pack Precision Voltage Monitor with Shell + Adapter Board for Ternary Lithium/LiFePO4 Batteries
$82.14
M6T24 24-Channel Serial Battery Pack Precision Voltage Monitor 5-inch HD LCD with Shell for Ternary Lithium/LiFePO4 Batteries
$78.41
M6T24 24-CH Serial Battery Pack Precision Voltage Monitor + Adapter Board without Shell for Ternary Lithium/LiFePO4 Batteries
$55.48
Technical parametersl:
- Depth detection range: 5-50 m
- Detection distance range:100-1000 m
- Rechargeable battery: continuous work, SD
- Voltage: 12VDC
- Thtemperaure range from 45~85
- Humidity: 0~ 95% (no condensation)
- 16 bit processor, 40MIPS speed—160MHz
- 32 bit DDS synthesis chip, waveform output
- Digital frequency synthesis 20PLL, automatic frequency stabilizer,0.1 mhz
- Color lcd display,480x320 pixels
- Net weight: 6.6 kg;Gross weight:10.5 kg.
- Product size: 47X37X13.5cm
Installation:
- Scanner installation management
Note:In
the daily work, the battery should be fully charged.If you don't fully
charge it, the EPX10000 can go wrong.If abnormal, this may be the first
warning that the battery voltage is too low and should be charged.If the
battery is charged all night,but the battery is still no power, you
need to replace the battery, or battery charger, or DC current output
port without electricity. If the battery is partly charged, the battery
may need to be replace the built-in battery.A new fully charged battery
can make EPX10000 work for 8 hours.
- Before turning to the
scanner,put an EPX10000 transmitter on the ground,the sensor antenna is
connected into the crresponding jack for transmitter.While opening the
transmitter,never plug or unplug the sensor,if to do so, it may cause
damage to the machine.
- Before using EPX10000 scanning,make all necessary connections:
Connect the sensor to the scanner testing (+) and (-) jack, insert the probe sensor to soil.
Install the antenna transmit device to the corresponding interface.
Rotate
the "on / off" knob with power key to switch on the power.In the LCD
display area,power indicator,horizontal trmming,longitudinal trmming
light indicator.
At this point, EPX10000 is scanning any selected elements.Before you start the testing,make it running for 3-5 minutes.
Remember
to turn off the EPX10000 power after the operation. To facilitate the
use of the device, the battery needs to be charged with a small charger
connected to the instrument's power line
- The battery of the instrument needs to be charged with a small charger connected to the instrument's power line.
Package List:
- 1 x EPX-10000 Metal Detector with degausser
