LY-ROCK Clone Version Electric Guitar Effects Pedal Double Preamplifier with Overload and Distortion Effects

LY-ROCK Clone Version Electric Guitar Effects Pedal Double Preamplifier with Overload and Distortion Effects

Description:
- This device is a real tube amp with compression to mimic the overdrive of the famous Dumble amp, yet still maintains a rich touch sensitive response throughout.
- This is a two-channel device, of which the ly-pedals (GL) have two separate channels of completely different sounds that combine to provide a wider range of sound.
- The first channel provides a smooth and creamy sound. It's really transparent and has a round touch-sensitive response that helps improve play. The controls (gain, tone and volume) are self explanatory and there is a toggle switch called COMP to select two different compression levels.
- The second channel offers a special hard-cut sound almost inspired by the timbre for Sonny Landreth. The controls are all self explanatory, and there's a toggle called JAZZ/ROCK.
- The ly-pedals (GL) are equipped with a special toggle switch to choose between two different switching modes. This switch is the middle dial "S" stands for "SINGLE", and "D" stands for "DOUBLE". When you switch to the S position, you can switch between 1 group and 2 groups of timbres at once, and when you switch to the D position, the two-channel is on, and you can use two channels at the same time.
- Open the back cover to finely adjust the tone through the precision adjustment inside
- The corresponding precision adjustment of 1st group is to adjust the gain (remember to open the back cover)
- The corresponding precision adjustment of 2nd group is used to control the transparency and the dial is used to control the gain (remember to open the back cover)

Attention:
- There is also a DUAL--SPLIT in the circuit. The default is to dial to DUAL. If you dial to the position of SPLIT, you can guide the signals of Group 1 and Group 2 to the outside world. Then they can be used alone or combined freely. However, this requires a special cable. That is, 6.5 large 3-core adapters can be used with 6.5 mono sockets. If there is no such adapter cable, you must turn the switch to DUAL, otherwise there will be no signal output.
- Remember--In single mode, you can only use one channel at a time, which means that pressing the footswitch on one of the two channels will turn off the other (avoiding accidental pedaling).
- This product must use a single Effects unit special power supply - 9V DC internal negative external positive (not included). Do not attempt to supply power with a voltage exceeding 9.7V. If the power supply is not used properly, it will directly burn the equipment. (Not covered by warranty)

Package Included:
- 1 x Guitar Effects Pedal