Makeblock Starter Robot Kit V2.0 With Electronics for Brain Development Toys

Makeblock Starter Robot Kit V2.0 With Electronics for Brain Development Toys

Description:
- Starter Robot Kit(With Electronics)V2.0 is the improvement version of Starter Robot Kit(With Electronics). Improvements come next:    

Improvements List:   
- Me BaseBoard V1.0 instead of previous Meduino V1.0 and Me BaseShield V2.0. Reduce Size and easier to users.    
- 2 Base Brackets instead of previous Arduino Acrylic Box and Battery Bracket. Base Bracket is a multi-purpose bracket which can use for Meduino V1.0, Me BaseBoard V1.0, Battery Holder, and even Raspberry Pi.    
- Micro USB cable instead of previous USB A-Male to B-Male Cable.    
- Adding New colorized instruction book. The instruction book is easy to understand and even a kid can enjoy building a robot by following it.   
- This Kit contains mechanical parts and electronic modules for you to start exploring the robot world, it can be used to build  a robot tank or a three-wheel robot car.   
- With the following electronic modules :  Me Baseboard V1.0, ultrasonic ranger sensor, IR remote controller and IR receiver.An IR contrtol robot or an ultrasonic obstacle-avoiding robot can be build. The Me series electronic modules are easy-to-use, very friendly to beginners.   

Features:   
- Strong aluminum extrusion parts, corrosion resistant(long time to shelve with barely rusting) and beautiful appearance(blue or gold)    
- Used to build a robot tank or a three-wheel robot car,the only limit is your imagination!    
- 2-wheel drive moving platform    
- Tracked vehicle platform    
- Me BaseBoard V1.0, ultrasonic ranger sensor, IR remote controller and IR receiver included    

Packing List:   
    1 x Beam 0824-96    
    16 x Socket Cap Screw M4x8    
    12 x Plastic Rivet R4060    
    1 x Beam 0824-128    
    24 x Socket Cap Screw M4x14    
    6 x Plastic Rivet R4100    
    2 x Beam 0824-144    
    16 x Nut M4    
    30 x Plastic Ring 4x7x2mm    
    1 x Bracket 3x3    
    1 x Nut M8    
    2 x BaseBracket    
    1 x Plate 3x6    
    8 x Countersunk Screw M3x8    
    1 x Battery Holder for (6)AA    
    1 x Bracket P3    
    8 x Headless Set Screw M3x5    
    1 x Me-Baseboard    
    1 x Caster Wheel    
    40 x Track Axle    
    1 x Me-Ultrasonic Sensor    
    2 x DC Motor-25    
    2 x Threaded Shaft 4x39mm    
    1 x Me-IR Receiver    
    2 x DC Motor-25 Bracket    
    2 x Shaft Collar 4mm    
    1 xMe-IR Remote Controller    
    2 x Shaft Connector-4mm    
    4 x Flange Bearing 4x8x3mm    
    1 x 6P6C RJ25 cable-20cm    
    4 x Timing Pulley 90T    
    1 x HEX Screwdriver 3mm    
    1 x 6P6C RJ25 cable-35cm    
    2 x Tyre 68.5x22mm    
    1 x Cross Screwdriver 3mm    
    1 x Micro USB cable    
    40 x Track    
    2 x HEX Allen Key 1.5mm    
    1 x Wrench 7mm    
    6 x Brass Stud M4*20   
Note:The battery of IR Remote Controller will be taken to assure safe transport, you may need to buy it by yourself. The battery size is CR2025. Sorry about the inconvenience.