| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $16.77 | $16.43 | $15.91 | $15.23 | Contact US |
SFS V2.0 Smart Filament Sensor Filament Runout Sensor 3D Printer Parts Supports 1.75mm Filaments
$21.77
TMC5160T PRO 8-56V Stepper Motor Driver Stepping Motor Driver 3D Printer Accessory for SPI SD Modes
$21.59
TMC5160T 8-35V Stepper Motor Driver Stepping Motor Driver 3D Printer Accessories Supports SPI Mode
$19.64
Makerbase MKS SGen_L V1.0 3D Printer Control Board 32 Bit Motherboard Support for Marlin2.0
Description:
MKS-SGEN_L is a 3D printer ARM motherboard by Makerbase. It uses a 32-bit Cortex-M3 LPC 1768 processor , running frequency is up to 100 MHz. It can be compatible with Smoothieware and Marlin 2.0 firmware. It support in-line drivers and external drivers. And the in-line driver is compatible with various modes (uart, spi, etc.). It is compatible with multiple LCD screens and MKS series touch screens. It is a versatile and cost-effective motherboard.
Specifications:
Motherboard model: MKS SGEN_L
Mounting hole size: 102mm × 76mm
Appearance size: 110mm x 84mm
Microprocessor: 32-bit Cortex-M3 (LPC 1768/100Mhz)
Input voltage: 12V~24V
Motor driver: TMC2130/2208/2100, 4988/8825
Temperature sensor interface: NTC100K/PT100
Display: support MKS TFT series screen and LCD screen
Support print file format: G-code
Recommended software: Cura/ Simplify3d/ Pronterface/ Repetier-Host
Firmware update: TF card update
Support machine structure: XYZ/deta/ kossel/ Ultimaker/corexy
Features:
1.Adopt 32-bit Cortex-M3 LPC 1768 chip, 100MHZ frequency, strong computing power, performance greatly improved.
2.It has both in-line drive port and external drive port, which is more expandable and selective.
3.Compatible with a variety of drivers and special modes (TMC2208 UART mode, TMC2130 SPI mode, etc.), dedicated port reservation, wiring settings are more convenient.
4.Support multiple open-source firmwares, including Smoothieware and Marlin V2.0.
5.Use high-quality circuit boards, and the corresponding pins of each interface are marked with silk screen for easier identification and modification.
6.Using a dedicated power chip, support 12V-24V power input.
7.Compatible with MKS LCD12864, MKS MINI12864 and other control boards developed by the Makerbase.
8.Compatible with all of MKS TFT touch screens.
Package List:
-1 x MKS SGEN_L Motherboard
-20 x Jumper Caps
-1 x USB Cable
Wring:
Pinout:
Size:
Motor Driver Setting:
Step /dir Normal Mode:
Uart Mode (MKS TMC2208 V2.0 / TMC2209 V2.0):
SPI Mode(MKS TMC2130_SGL):
