MAT-TUNER mAT-180H Automatic Tuner Shortwave Antenna Tuner w/ mAT-CK Cable for KENWOOD Transceivers

MAT-TUNER mAT-180H Automatic Tuner Shortwave Antenna Tuner w/ mAT-CK Cable for KENWOOD Transceivers

Description:
The mAT-180H provides automatic antenna tuning across the entire HF spectrum plus 6 meters, at power levels up to 120 watts. It will tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It will match an amazing range of antennas and impedances, far greater than some other tuners you may have considered, including the built-in tuners on many radios.

The mAT-180H is an automatic antenna tuner specially designed for modern KENWOOD HF transceivers.

When the tuner is used for KENWOOD transceiver through mAT-CK control cable, it is fully compatible with original tuners for KENWOOD, such as AT-250, AT-300. Transceivers for KENWOOD that can use mAT-180H are TRC-80, TK-80, TS-2000, 50, 450, 480SAT (excluding HX version), 570, 590, 850, 870, 990, etc. Other types of transceivers can use mAT-180H as long as they support KENWOOD AT-300 tuners. KENWOOD TS-430, TS-440 are too old to use this tuner.

The mAT-180H has 16,000 frequency memories. When tuning on or near a previously tuned frequency, the mAT-180H uses "Memory Tune" to recall the previous tuning parameters in a fraction of a second. If no memorized settings are available, the tuner runs a full tuning cycle, storing the parameters for memory recall on subsequent tuning cycles on that frequency. In this manner, the mAT-180H "learns" as it is used, adapting to the bands and frequencies as it goes.

Features:
- Compatible with the original tuner, you can tune with one key through the front panel of the radio
- Equipped with special terminal, it is perfect for long antenna
- With manual fine-tuning function, it can be manually fine-tuned to the lowest VSWR on the basis of automatic tuning
- With frequency tracking function, it can automatically set matching data with the change of radio frequency
- Powered by your radio, using a mAT-CK cable; no additional power supply required
- Its shell is processed by aluminum milling process; beautiful, delicate and sturdy
- Key components and RF socket are purchased from abroad to ensure excellent and stable performance

Specifications:
- RF power 1-120W (PEP); tuning power 5-10W
- Suitable for 1.8-54MHz frequency range
- Up to 16000 memory channels
- The complete tuning time is not more than 5 seconds, and the storage tuning time is not more than 0.1 seconds
- The maximum current consumption during operation is not more than 0.5A
- Dimensions: 20 x 13 x 4cm/7.9 x 5.1 x 1.6" (LxWxH)
- Net weight: 0.8Kg/1.8Lb

Package Included:
- 1 x Automatic Tuner
- 1 x mAT-CK Cable