Measuring RF Power Module RF Detector High-Frequency Detector Power Measurement 0.1-2.4GHz

Measuring RF Power Module RF Detector High-Frequency Detector Power Measurement 0.1-2.4GHz

Description:
RF260 is a RF power module. Advantages are: simple structure, easy to use, stable performance, reliable, high sensitivity and measurement speed and so on.
 
Application:
- RF power measurement
- Instrument calibration
 
Parameters:
1. Measuring power range: -65- 0 dBm (external RF attenuator can be extended to 100dBm)
2. Measuring power resolution: 0.1 dBm
3. Measurement frequency range: 100 ~ 2400 MHz
4. Measuring power: 1nW ~ 100mW
5. Operating Voltage: 7 ~ 17 VDC
6. Operating current: <50 mA
7. Dimensions: 52 * 34 * 10 mm L xWxH
 
Introduction:
- Output mode: S2 pads on the circuit board: open (output 0.00V ~ 5.00V); shorted (output 0.00V ~ 10.00V), default is open.
- Adjust potentiometer RW1 output error correction, the correction range +/- 5dBm.
 - P1 Interface: RF signal input. (RP SMA KE KHD within the outer screw pin female)

P2 connection definition:
1. VDD positive power supply module (7V ~ 17V)
2. GND negative power supply module
 
P3 connection definition:
1. OUT dBm output voltage signal (0.00V ~ 5.00V / 0.00V ~ 10.00V).
2. GND power supply negative
 
Note: When the output is 0.00V ~ 10.00V, power supply voltage should be 15 volts.
 
- Output (0.00V ~ 5.00V); the range: (-80 ~ + 20dBm); resolution: 0.050V / dBm
- Output (0.00V ~ 10.00V); the range: (-80 ~ + 20dBm); resolution: 0.100V / dBm
- Formula to calculate dBm output voltage (V) / resolution) = dBm.
- For example: output (0.00V ~ 5.00V) output is 2.5V;  (2.5 (V) /0.05) -80dBm = -30dBm.

Package included:
- 1 x Measuring RF Power Module