| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $31.61 | $30.97 | $30.00 | $28.71 | Contact US |
Scout Mini 4WD Robotic Car Mobile Robot Chassis Robot Car with 10KG Payload (Mecanum Wheels)
$2,320.97
Scout Mini 4WD Robotic Car Mobile Robot Chassis Robot Car with 10KG Payload (Standard Wheels)
$2,126.64
AR4 6-Axis Mechanical Arm Set + Electric Fixture Opensource Robotic Arm for ROS1/2 Moveit
$2,365.15
Mechanical Arm Hand Robot Clamp Claw Gripper w/ Servo & Controller for Car Robotics Arduino DIY Assembled
Specification:
- Already assembled
- Material: Hard aluminum alloy + glass fiber
- Maximum opening: 140mm
- Servo: LDX-335MG
- Servo torque: 19kg
Features:
- The inner edge of the claw likes wave, which is more stable;
- Symmetrical clamping, convenient to determine the clip position;
- At the end of the claw with M2 and M3 hole position, for DIY.
- With spacing pillars, to a certain extent will protect hand form clamping the hand
Servo Controller Parameter:
- Width*Length: 35*50mm
- Weight: 13.8g
Servo Controller Wiring method: (Either of the following way is ok)
- 7.4V lithium battery charging terminal can be directly inserted in the white terminal;
- Connecte the power supply to the blue terminal , the positive voltage can be 5~8.4V .
Servo Controller Usage method：
- Connect the power supply to the board;
- Connect the servo to the servo interface. "+"is positive, "-" is negative, "S" is the signal terminal;
- Turning the knob, the servo will rotate synchronously;
- There is an elastic button under the knob which can switch mode;
Package List:
- 1 x Mechanical Robot Arm with servo
- 1x Servo Controller
