Metal Silvery LightMate 2R Film Camera Light Meter 30°FOV High Precision Chargeable Ambient Light Digital Exposure Meter

Metal Silvery LightMate 2R Film Camera Light Meter 30°FOV High Precision Chargeable Ambient Light Digital Exposure Meter

Improvements:
1. The field of view of the metering lens has been adjusted from 35° to 30° for a more accurate metering angle.
2. Add a "magnetic filter interface" that can install filters such as incident light measuring spheres.
3. Update to "2nd generation Pinball Anti loosening Shoe Seat".
4. The metering button has been updated from a two-segment design to a simpler and more user-friendly "single-segment button".

Installation Requirements:
- The camera can manually control the aperture and shutter speed.
- The camera comes with a shoe mounting interface.

Description:
- It is a light meter or exposure meter used to provide exposure parameters for film cameras.
- Your camera needs to be able to manually control the aperture and shutter speed.
- Based on your shooting creativity, use the aperture and shutter value provided by the exposure meter to create.
- Firmware website: Lightmate.pro

Basic Function:
- Press type dial wheel. (Press the dial to switch between shutter priority and aperture priority, long press to enter ISO/system settings)
- Two stage metering button. (Half press metering, long press continuous metering; full press on/off)
- Single metering, automatic continuous metering, average metering. (Quickly switch multiple metering modes)
- Aperture priority and fast priority modes.
- Exposure compensation function. (Support step value +/-0.5EV, range +2EV ~ -2EV)
- Light metering over range prompt. (Lower limit prompt Error Underexposure and upper limit prompt Error Overexposure)
- Exposure combination reciprocity. (Quickly obtain multiple exposure combinations with the same exposure amount)
- LED light prompts completion of metering. (Flashing prompt after metering is completed, can be closed in the menu)
- Save settings and exposure parameters. (Remains unchanged after shutdown/restart)
- Real time display of remaining power.
- Customize the automatic shutdown time. (Default no operation for 30 seconds of dark screen ->automatic shutdown for another 2 minutes (can be adjusted in the menu)
- Customize screen brightness adjustment.
- Screen flipping display. (Adapted to cameras with cold shoe at the bottom. Eg. for Rollei 35 camera)

Advanced Functions:
- "Digital depth of field ruler". (Quick provision of depth of field information, switchable lens system (full, medium, large, half grid) and lens focal length)
- "Digital ND filter" function. (Compensate for metering results after installing a light attenuation filter in the imaging lens)
- Provide multiple dial interfaces one after another. (such as "classic numbers", "pointer simulation", etc.; this function will be added later through firmware updates)
- Update the system firmware through USB-C. (Supports PC or MAC, recognized as a USB flash drive, firmware can be inserted!)

Specification:
- Light receiving method: reflected light
- Light receiving angle: approximately 30 degrees
- Sensing element: silicon photodiode array
- Metering mode: aperture priority metering/shutter priority metering/EV metering
- Light metering range (ISO100): EV-1.1 ~ EV21
- Photometric accuracy: ±0.1EV
- Display range:
  Sensitivity: ISO1 ~ ISO8000
  Shutter: 60s ~ 1/8000s
  Aperture: F1 ~ F64
  EV: EV-1.1 ~ EV21
- Exposure compensation: EV-2 ~ EV+2
- Screen size: 0.96-inch OLED display/128x64 pixels
- Battery type: built-in polymer lithium-ion battery 3.7V/110mAh
- Charging parameters: Charging interface USB Type-C/voltage DC5V+10% maximum current 0.2A, charging time about 1 hour
- Working temperature: -10°C ~ 60°C
- Working humidity: 30% ~ 80%
- Storage temperature: -20°C ~ 70°C
- External dimensions:
  Excluding hot shoe: 38mm x 29.5mm x 14mm
  Including hot shoe: 38mm x 29.5mm x 18mm
- Net weight: 26

Package Included:
- 1 x Film Camera Light Meter
- 1 x Screw Driver
- 1 x User Manual

Note:
- The film camera is not included.
- If you are not sure whether the camera can be installed, please send a picture of the camera shoe holder to customer service for consultation.