MHS-5200P DDS Digital Dual-Channel Arbitrary Waveform Generator Function Signal Generator (25M)

MHS-5200P DDS Digital Dual-Channel Arbitrary Waveform Generator Function Signal Generator (25M)

Description:
- MHS-5200P power type DDS arbitrary waveform signal generator is a multifunctioal versatile signal generator, the instrument has all the features of MHS-5200A and increases dual-channel amplifier based on the MHS-5200A.
- Two options for built-in power module , one is the bandwidth of the amplifier 0-80kHz (MHS-5200P), the other is 0-5MHz (MHS-5200P +)
- The difference among 6M, 12M, 20M, 25M is the different about maximum sine wave frequency signal output, other features are the same.In the conventional function signal and any signal output side, MHS-5200P (ordinary) and MHS-5200P + (broadband-type) technical indicators are the same, we use the following to introduce this form in detail:
For example: 5200P (25MHz ordinary) indicates the maximum output frequency of the sine wave model of the machine is 25MHz, the amplifier output signal frequency is DC (0KHz ~ 80KHz)
5200P + (25MHz broadband) Indicates the maximum output frequency of the sine wave model of the machine is 25MHz, the amplifier output signal frequency is (0KHz ~ 5MHz).

Features:
1. Direct digital synthesis (DDS) technology, FPGA design, low power consumption;
2. Dual output, can work in sync phase adjustable;
3. With up to 600 seconds of linear and logarithmic sweep sweep function;
4. With a sine wave, the basic function waveform triangle wave, square wave, sawtooth rise, falling sawtooth and variable duty cycle of the pulse wave, but also has 16 sets of arbitrary waveform customized by the user;
5. With M0 ~ M9 total of 10 sets of parameters stored bits M0 boot automatically transferred out of data;
6. 15MHz or less, the sharpest of up to 15Vp-p, more than 12MHz, the biggest reach 8Vp-p;
7. Built sophisticated -20dB attenuator reach the minimum amplitude resolution 1mV;
8. With 120% ~ + 120% DC bias function;
9. Pulse duty cycle adjust accurate to 0.1%;
10. With four variable phase difference of TTL output;
11. Has a frequency measurement, period measurement, positive and negative pulse width measurement, duty cycle measurements and counting function;
12. Four optional frequency measurement gate time, which strike a balance between speed and accuracy;
13. All parametric EQ calibration can be performed by internal procedures;
14, powerful communications features, completely open communications protocol, the secondary development becomes very simple;
15. After the connection with the PC, the PC can be used to control the instrument, and can be edited on the PC arbitrary waveform output waveform is downloaded to the instrument.
16. This model machine can be equipped with an increase in power module, the signal output amplitude reaches 30Vpp, the maximum output current reaches 1A

Model Description:
MHS-5200P power-type function signal generator is based on the MHS-5200A on the increase in two-channel power amplifier, the instrument has all the features of MHS-5200A; the way the output signal is divided into two, the front panel CH1 and CH2 non-port BNC signal amplifier, the output amplitude range is 5mVp-p ~ 20Vp-p; rear panel terminal CH1 and CH2 output is the result of a power amplifier amplified signal voltage amplitude range is 30mVp-p ~ 30Vp-p .
Our power signal generator biggest feature is the amplitude of the signal is digital amplifier continuously adjustable, very accurate, because we are completely independent dual-channel amplifier, the output voltage can be used in series up to 60V, the maximum current can also be used in parallel up to 2A, maximum power is 30W.

MHS-5200P (25M)
Amplifier signal bandwidth (Including sine,square, and other waveforms):DC(0kHz)~80kHz
Non-amplifier signal bandwidth (Sine wave):0Hz~25MHz
Non-amplifier signal bandwidth (Other than the sine wave):0Hz~6MHz

Machine built-in power module has two options,
One is the bandwidth of the amplifier 0-80kHz common type of (MHS-5200P), Another type is the bandwidth broadband amplifier 0-5MHz's (MHS-5200P +),
You can choose different models according to their needs, two types of power amplifier parameters are as follows:

MHS-5200P Project:
Signal bandwidth:DC(0kHz)~80kHz    
Output signal amplitude:30mVp-p~30Vp-p
Maximum output current:1A    
Maximum power output:15W*2
Output short circuit protection:There are (limiting)    
Output Impedance:<=1ohm    
Output phase terminal:In phase with the signal of the inverter    
Distortion    <1%    
Output signal flatness:±1dB  



Package Included:
- 1 x Power adapter
- 1 x MHS-5200P DDS Digital Dual-Channel  Generator (25M)
- 2 x Clip line
- 1 x Power extended board
- 1 x 4 channel TTL extended board