Mini Open source Tau Labs 10dof Sparky Flight Controller CC3D upgraded version CAN input for DIY FPV drones 250 260 320 400

Mini Open source Tau Labs 10dof Sparky Flight Controller CC3D upgraded version CAN input for DIY FPV drones 250 260 320 400

Description:
- The latest Black Edition, you can choose to accept 3.3v or 5v power supply
- The latest development of flight control, very small, only about 3X3cm
- CC3D upgraded version, upgrade M4 processor with floating point arithmetic
- 9-axis sensor, integrated electronic compass, gyroscope, accelerometer, a barometer
- PPM SBUS DSMX signal input, can not be directly input PWM
- Increased input CAN bus protocol to facilitate the development of different modules
- Supports a variety of GPS functions, fixed, fixed high and home
- The main modes are multi-axis mode and fixed-wing mode
- There android phone ground stations, support for mobile control! Develop powerful

Specifications:
- GPS capable for functions such as RTH (Return To Home), Position Hold and Waypoint navigation in conjunction with a ground station.
- Mavlink compatible for the use of telemetry radios for use with a ground station to provide location information and waypoint navigation.
- Barometric pressure sensor on board for accurate altitude hold indoors or out
- 9 dof accelerometer / gyro for the absolute quickest and most accurate angle recognition and correction
- 2 serial ports
- PPM only - SBus Support and DSM2/x support with user selectable 3.3v or 5v setting.
- Camera stabilization output for 3 axis
- 10 channel outputs
- Up to 3 adc inputs for rssi
- Very compact design, perfect for small UAV's where space is limited. Also excellent in larger machines as well.
- Weight 6.9g with right angle header pins
- 30mm x 30mm mounting pattern
- Available with 90 degree header pins and straight header pins for easy installation no matter what your frame requires.

Package Included
-1x Tau Labs 10DOF Sparky Flight Controller CC3D