MN002-D1 R/G Stage Laser Light+Laser Stage Lighting +Tripod+AC Power Supply

MN002-D1 R/G Stage Laser Light+Laser Stage Lighting +Tripod+AC Power Supply
Specifications:

- Various shape, wide scope
- Power:AC power supply input AC 100V-240VAC/50-60HZ,Output 6.0v/1000mA
- Many pattern mini type stage laser lamps
Unboxing Check
Thank you for using our products,For the sake of safety and better operation of this projector,please read this manual carefully before using and operating it,lest incur any personal injury or damage to the projector.
Package List:
1.Projector 1PC    2.AC power supply 1PC    3.Remote Control 1PC    4.Tripod 1PC
Notice
- Please operate the projector according to the Manual strictly.
- This unit is intended for indoor use only and should be prevented from water,moisture and shake.
- The working temperature of this unit is 15~30°C,and it must be powered off after continuously working 2 hours to let the laser diode cool down.
- To keep the body of this unit clean to avoid any unnecessary troubles.
- Do not turn on and off it frequently and try to avoid making it worked for a long time.
- Do not use the telescope to watch the laser rays,otherwise will be largen the dangers.
- You had better use the original package during the transportation.
Warnings:
- The grade of the laser for it is Class III A,and will be dangerous if exposure to the eyes directly.
- The workimg Voltage is 100-240V/50-60HZ,once exceeded this range its lifetime will be shorten.

Shape:  Glowwarm shaped, Star-shaped
Statement:
All the projectors are examined strictly before shipment,In that case the user should operate it according to the manual strictly,We and the distributor will not be responsible for any mistakes cause by the wrong operations.
especially click it: Red green laser bubble, red green all over the sky star plane laser some effect , On plane, present 2000 bubbles is moving about , flash joins various effect open

Specification:
- Power:AC power supply input AC 110V-240V/50-60HZ,Output 12.0v/1.5~2.0A
- Laser generator-Wavelength: 532nm(Green),650nm(Red)
- Packing Dimension:180*140*70mm
-- Control way: acoustic Control, since going
- Scanning system: Big angle step is into generator scanning
- applicable place  (for certain  activities): KTV box, DISCO and nightclub, performing arts , opera House, yard party etc
- Laser color:  red green
- Weight:0.6KG
mode of operation:
- The terminal point pH be.Put through stage lamp power source make machine enter till machine state
- Press the key of mains switch on remote control, make machine enter automatic pattern
Entire machine begins to carry out work
- Three cubed is twenty seven.Press sound to control switch machine to enter sound to control
  pattern, being have sound machine just work.
- Follow the change of sound size and frequency, frequency metropolis and the brightness of
  laser lamp occur change.
- Press recovery state key machine enters automatic pattern.
The panel introduction of remote control
1.Mains switch     2. Sound controls switch    3. Resume state