MTX9D Multiprotocol TX Module For Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Transmitter

MTX9D Multiprotocol TX Module For Frsky X9D X9D Plus X12S Flysky TH9X 9XR PRO Transmitter

Description:
-This multiprotocol TX module is suitable for many brand's quadcopters, helicopters and airplanes. You can control RC quadcopters, RC helicopters or RC airplanes flexibly when you insert the TX Module to your Frsky X9D/X9D Plus/X12S, flysky TH9X, Turnigy 9XR/9XR PRO transmitter. You will get many new ways to control the RC models.
-Support various remote controllers of AETR channel, the remote control system is recommended to choose Opentx/ER9X.

Specification:
Item name: Multiprotocol TX Module
Mode: MTX9D
Signal frequency: 2400-2483.5Mhz
Controllable range: about 100m
Input voltage: 6V-13.5V
Supported remote control: for Frsky X9D/X9D Plus/X12S, flysky TH9X, Turnigy 9XR/9XR PRO
Supported Remote control channel order: AETR
Supported brand: for Cheerson, Syma, Wltoys, Eachine E010(Most of these brand's quadcopters, helicopters and airplanes are compatible but not every model. Specific models please check instruction under the note.)

Binding Procedure:
1. Create a model in OpenTX using external module in PPM mode, 12 channels and AETR sequence order.
2. Turn off the radio transmitter.
3. Power up for the quadcoper or other toys airplane (in the list).
4. While holding the appropriate stick pattern listed below, power up Taranis.

Package List:
-1 x MTX9D Multiprotocol TX Module
-1 x Anti-static Tape

Note: This multiprotocol TX Module only supports remote control of AETR remote control channel order. Optimal system is Opentx/ER9X. But JR and TAER remote control channel order is not available now.