NanoVNA V2 Plus4 Hardware Vector Network Analyzer VNA 50KHz-4GHz Antenna Analyzer 4" TFT HF VHF UHF

NanoVNA V2 Plus4 Hardware Vector Network Analyzer VNA 50KHz-4GHz Antenna Analyzer 4" TFT HF VHF UHF

Description:
It is a 4GHz second-generation NanoVNA vector network analyzer. V2 Plus4 is a new hardware version.

Features:
- 4" display
- 4GHz frequency range
- Scanning speed increased by 4 times (400 points/sec)
- Up to 90dB dynamic range (1GHz)
- Up to 80dB dynamic range (3GHz)

More Information:
- Information: https://nanorfe.com/nanovna-v2.html
- Software download: https://nanorfe.com/nanovna-v2-software.html
- User Manual: https://nanorfe.com/nanovna-v2-user-manual.html

Operation Introduction:
- Tap anywhere on the screen to open the menu
- Use the STIMULUS menu to set the frequency range
- Use the CAL> CALIBRATE menu to calibrate
- For detailed instructions, see the user manual

Specifications:
- Measuring frequency range: 50kHz-4GHz
- System dynamic range: 70dB (to 3GHz, after calibration, no averaging)
- System dynamic range: 80dB (to 3GHz, after calibration, 5x average)
- System dynamic range: 90dB (to 1GHz, after calibration, 20x average)
- S11 noise level (after calibration): -50dB (to 1.5GHz); -40dB (to 3GHz)
- Scanning rate: 400 points/sec (f >= 140 MHz), 200 points/sec (f <140 MHz)
- Number of scanning points (on the device screen): adjustable, up to 201 points
- Number of calibration points (the maximum number of scan points for USB): 1024 points
- Power supply: USB
- RF port: SMA (not RP-SMA)
- USB interface: USB Type-B
- Display screen: 4-inch TFT (480 x 320)
- Battery: With 3200mAh lithium battery
- Port 2 return loss: >= 15dB (to 3GHz), 20dB (to 1.5GHz)
- Display tracking: 4, marking: 4, setting save: 7
- Computer software compatibility: For Linux, Windows (above 7), Mac OS

Package Included:
- 1 x VNA Host
- 2 x 30cm SS405 RF Cables
- 1 x Set of SOLT Calibration Parts
- 1 x USB Cable
- 1 x Touch Screen Pen