NVCM6V2.1 MACH3 USB Port 6 Axis Motion Controller CNC Card NVCM Board 125KHz

NVCM6V2.1 MACH3 USB Port 6 Axis Motion Controller CNC Card NVCM Board 125KHz

Product Introduction:
- Novusun CNC has engaged in the Numerical control industry for 7 years, specialized in the research, development and production of various CNC controller systems with high quality and high reliability. We produce the Brushless DC motor, Stepper motor driver, and also 1 to 6 axis CNC motion controllers.
- NVCM is the 6 axis motion controller we spend 1 years to design.
- NVCM support Mach3 software, through USB port to communicate with computer. This manual introduces operation, connection and usage schedule of our professional motion controller for engraving machine. Through a lot of the drawing the users can learn quickly how to use this motion controller.

Products specification:
- Support USB;
- 16  ports photoelectric isolated input interface；
- 16  ports photoelectric isolated output interface；
- 1 port 0-10V spindle speed analog output interface(can change to PWM output)；
- can support 6 axis stepper systems maxisim,125KHz pulse output for every axis；
- ARM motion control chip；
- Main device is 12V-32VDC power supply input,current should higher than 1A；

Appearance and size:
- NVCM motion controller is with the sealed open structure, there are 4pcs setting holes at
the bottom. We can fix 2pcs 3mm diameter holes at the cabinet, and install the controller into the cabinet.The controller appearance as the Figure 1-1 and
- The products overall size is 150mm*84mm*20mm； The bottom install size is 125.5mm*71.5mm。

Substantival explanation:
- When operate the NVCM, where will be a lot of English abbreviation, now we list all . FRO: Feeding adjust: During the operating process, the F value already set, and need to adjust the current feeding speed, then we can adjust FRO value to realize it.
- SRO: Spindle speed adjust: During the operating process, the S value already set, and need
to adjust the current spindle speed, then we can adjust SRO value to realize it :
Current Speed S#=setting S*SRO.
- SRJ:speed adjust manually,During the operating process,as the manual speed already
set,and we need to adjust the current speed,and impossible to fix the value during it is
working,then we can revise the SRJ value to realize it.Current manual speed FS#=Setting manual speed*SRJ.
- F:Feedingspeed,the unit is mm/min.For example F=200,means every minute feeding
2000mm.
- S: Spindle Speed. Unit is rad/min.For example S=20000,means 20000 revolution/Minute.
X axis Coordinate    Y axis Coordinate    Z axis Coordinate    A axis Coordinate
B axis Coordinate   C axis Coordinate