| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $209.49 | $205.22 | $198.81 | $190.26 | Contact US |
USBCAN Debugger USB to CAN Bus Analyzer Compatible with PCAN Support Offline Playback for CANTest/CANMonitor/TSMaster
$37.60
Dual Channel CANFD USB to CANFD CAN Debugger Support for CANTest/PCANView/TSMaster Compatible with ZLG PCAN FD
$105.99
Dual Channel CANFD & Dual Channel LIN USB to CANFD CAN Debugger 25Kbps-5Mbps Compatible with ZLG PCAN FD
$121.54
Original FlashPro4 FPGA Programmer for Microsemi Supports USB 2.0 (Not for SPI-Slave Programming)
Download Software:
Link for https://www.microchip.com/en-us/products/fpgas-and-plds/fpga-and-soc-design-tools/programming-and-debug/flashpro-express#software
Key Features:
- Supports in-system programming
- Supports IEEE 1149 JTAG programming through STAPL
- Supports USB 2.0 available
Overview:
1. Hardware
FlashPro4 is a programmer supporting for all FPGAs in the PolarFire, SmartFusion2, IGLOO2, RTG4, IGLOO, ProASIC3 (including RT ProASIC3), SmartFusion and Fusion families. FlashPro4 offers extremely high performance through the use of USB 2.0 and is high-speed compliant for full use of the 480 Mbps bandwidth. Powered exclusively via USB, FlashPro4 provides a VPUMP voltage of 3.3 V for programming these devices.
Multiple FlashPro4 programmers can be connected to a single PC using USB hubs, enabling the end user to set up a small-scale production environment with concurrent ISP occurring across multiple boards and the FlashPro software.
2. Software
To work with FlashPro4 programmer you need FlashPro or FlashPro Express programming tools.
FlashPro or FlashPro Express tools are available as follows:
- Standalone Programming and Debug tool
- Integrated with SoC V11.9 or Earlier (for Libero) and SoC V12.0 or Later for Libero.
Package Included:
- 1 x Programmer
Packaging Details:
- G.W.: 0.4kg
Notes:
1. FlashPro6 is required for Libero SoC v12.2 / FlashPro Express v12.2 / SmartDebug v12.2 software or later versions.
2. FlashPro5 is required for Libero SoC v11.4/Libero SoC PolarFire v1.1/ FlashPro v11.4 software or later versions.
3. FlashPro4 is required for Libero IDE v8.6 SP1 or FlashPro v8.6 SP1 software or later versions.
4. FlashPro and FlashProExpress software support our earlier discontinued hardware programmer FlashPro3 also. For more information, read the product discontinuation notification.
5. Flashpro6 for SPI-Flash Programming is required for Libero v12.3 / FlashProExpress 12.3 / SmartDebug v12.3 software or later version.
6. SoC v12.5 or later (for Libero) supports PolarFire SoC.
