| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $39.73 | $38.92 | $37.70 | $36.08 | Contact US |
Hobbywing Xrotor-X11-18S Counterclockwise 75KV High Pressure Drive Agriculture Drone Power Kit 18S LiPo for UAV Drones
$369.72
Hobbywing Xrotor-X11-18S Clockwise 75KV High Pressure Drive Agriculture Drone Power Kit 18S LiPo for UAV Drones
$369.72
Hobbywing Xrotor-X11-14S Counterclockwise 95KV High Pressure Drive Agriculture Drone Power Kit 14S LiPo for UAV Drones
$350.28
Piglet Electric Molar Machine Veterinary Grinding Molar Grinder Equipment for Pet Pig Farm
Features:
1. Multiple Accessories: High hardness, long service life, with four spare grinding heads.
2. Aluminum Alloy Mouth Guard: Specially made aluminum alloy sheath, high safety and accuracy, without hurting the gums.
3. Strong Heat Dissipation: There are air inlets and air outlets on the shell. If the motor is overheated after long-time use, please use it after cooling.
4. Adjustable Speed: There is a speed-regulating wheel on the surface of the molar, and the speed should be medium and high speed.
5. Equipped with Handle: Equipped with a handle at the end of the molar, easy to store after use.
Instructions for Use:
1. Power supply: voltage 220V, frequency 50Hz, AC power supply.
2. Install the grinding head: unscrew the alloy sheath first, insert the diamond grinding head to the appropriate depth of the chuck, gently press the bayonet, turn the lock nut to let the bayonet snap into the slot in the motor shaft, tighten the lock nut with a wrench, and then tighten the alloy sheath, taking care not to expose the diamond grinding head.
3. Debug the machine: adjust the speed wheel to low gear, connect the power plug, slowly turn the speed wheel, check whether the machine rotates flexibly and the sound is normal, it is appropriate to use medium and high speed when using.
4. Correct operation: the motor is an air-cooled motor. Do not block the air inlet or air outlet by hand. Due to the high-speed operation of the motor, it is normal to have a slight heat in the front section when working for a long time, but it should not be hot. When the motor is overheated, it should be cooled before use.
5. Cleaning and storage: after use, the alloy sheath, diamond grinding head, lock nut, chuck, etc. should be removed, cleaned and disinfected and dried; wipe the dirt on the surface of the molar with a dry cloth, and store in a cool and dry for reuse.
6. Carbon brush: carbon brush is an electrical conductor, featuring long service life, safety and reliability.
Package List:
-1 x Piglet Molar Machine
-1 x Small Wrench
-4 x Molar Rod
