Pixhack 2.8.4pro Fight Control Auto Pilot Improved Edition for Drone Multicopter Quadcopter

Pixhack 2.8.4pro Fight Control Auto Pilot Improved Edition for Drone Multicopter Quadcopter

Product Description:
- Pixhack 2.8.4pro flight control 32bit open source Pixhawk auto pilot Improved edition
- CNC aluminum all oy shell higher precision, better heat dissipation.
- Pixhawk strong open source program,provides rich external extened ability.Pixhack2.8.4 flight control is updated PIXHAWK
It rid off some lesser used interface,it separates IMU inertial control unit from main control,IMU uses suspension structure and has effective shock inhibitory action for the high-speed small frame.
- The product is default shell pattern.

Features:
- Separate IMU inertial control unit,inner suspension damping structure to effectively restrain the frame shock.    
- Rid off some lesser used interface,such as SPKT / DSM,CAN
- Base on Pixhawk open source program,rich external extened ability
- External interface GPS\Telem\Power can general with APM2.5\2.6\2.8

Parameter:
- Main control dimension: 69mmx45mmx16mm
- Main control weight:33g

Official website:Click here               

Note:The product is default shell pattern.If you need custom pattern,please contact us.

Features:
- Advanced 32 bit ARM CortexM4 high performance processor
- Eight PWM servo output,the max support 8-axis multi-propeller
- Provide automatic and manual mode
- Provide redundancy power input and fail-over capability
- Muti-colour LED light
- Provide multi-tone buzzer interface
- Micro SD recording flight dates

Hardware parameter:  
- Processor
1.32 bit 2Mb caching STM32F427 Cortex M4 with hardware floating point processing unit
2.main frequency 168MHZ,256K RAM
3.32 bit STM32F103 back-up coprocessor
- Sensor
1.L3GD20 3-axis digital 16bit gyroscope
2.LSM303D 3-axis 14bit acceleration / magnetometer
3.MPU6000 6-axis acceleration / magnetometer
4.MS5611 high precision barometer
- Interface
1.Futaba SBUS compatible input
2.PPM signal input
3.PWM signal output  
4.I2C interface 1pcs (1.25mm spacing 4pin JST jack)
5.Telemetry interface 2pcs (1.25mm spacing  5pin JST jack )
6.Power module interface 1pcs (1.25mm spacing 6pin JST jack)
7.GPS interface 1 pcs (1.25mm spacing 5pin JST jack)

Package List:
- 1 x Pixhack 2.8.4 Main control
- 1 x Safety Unlock switch
- 1 x Buzzer
- 1 x Micro SD Card
- 1 x SD Card reader