Pixhawk PX4 Autopilot PIX 2.4.6(2.4.5) Flight Controller 32 bit ARM for RC Model (with External LED)

Pixhawk PX4 Autopilot PIX 2.4.6 Flight Controller 32 bit ARM Set Better Than APM with Case for RC Model(with External LED)

Pixhawk 2.4.6 Description:
Compare to the old version 2.4.5, this newest version make several improvements.
- SD card base adopts deadlock function. SD card will not be easily taken out unless press the SIM
- The front jacks all adopts imported the gilded needle, has better contact resistance, more stable and reliable
- NEC original tantalum capacitor is added in back compass and main power supply, making each sensor has stable power supplying and lesser possibility of aircraft crashing
- The same matte black gold plate as the original version, high quality





Features
- Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS    
- 14 PWM/servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible)    
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)    
- Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply    
- Backup system integrates mixing, providing consistent autopilot and manual override mixing modes    
- Redundant power supply inputs and automatic failover    
- External safety button for easy motor activation    
- Multicolor LED indicator    
- High-power, multi-tone piezo audio indicator    
- microSD card for long-time high-rate logging    

Microprocessor:   
- 32-bit STM32F427 Cortex M4 core with FPU    
- 168 MHz/256 KB RAM/2 MB Flash    
- 32 bit STM32F103 failsafe co-processor   

Sensors:   
- ST Micro L3GD20H 3-axis 16-bit gyroscope    
- ST Micro LSM303D 3-axis 14-bit accelerometer / magnetometer    
- Invensense MPU 6000 3-axis accelerometer/gyroscope    
- MEAS MS5611 barometer    

Interfaces:   
- 5x UART (serial ports), one high-power capable, 2x with HW flow control    
- 2x CAN    
- Spektrum DSM / DSM2 / DSM-X® Satellite compatible input    
- Futaba S.BUS® compatible input and output    
- PPM sum signal    
- RSSI (PWM or voltage) input    
- I2C®    
- SPI    
- 3.3 and 6.6V ADC inputs    
- External microUSB port    

Power System:   
- Ideal diode controller with automatic failover    
- Servo rail high-power (7 V) and high-current ready    
- All peripheral outputs over-current protected, all inputs ESD protected    

Weight and Dimensions:    
- Weight: 38g (1.31oz)    
- Width: 50mm (1.96")    
- Thickness: 15.5mm (.613")    
- Length: 81.5mm (3.21")    

Pixhawk includes:
- Pixhawk px4 2.4.6 32 bit ARM Flight Controller   X  1pcs
- Original shell  X  1pcs
- Buzzer  X  1pcs
- Safety button  X  1pcs
- External LED light board(with USB function)   X  1pcs