PLC Controller Board For Mitsubishi FX3U LK3U-32MR Relay Output Standard Version 0-10V Input

PLC Controller Board For Mitsubishi FX3U LK3U-32MR Relay Output Standard Version 0-10V Input

Features:
- Controller for Mitsubishi FX3U
- Support 8-axis pulse
- 32,000 steps
- Programming method: use programming software for Mitsubishi, the model selection is FX3U, the baud rate is 19200, and the download line is USB to 232. The driver can be installed using device for DriverGenius
- High degree of encryption
- Stable performance, good compatibility, wide application
- PLC function layout is reasonable, and the module uses terminal wiring, and the analog quantity is stable and does not jump.
- High-speed chips ensure smooth operation of equipment
- With indicator lights
- Installation method: DIN35 rail installation, 5mm screw mounting holes

Introduction:
- Dimensions: 190 x 117 x 56 mm
- Hole Spacing: 190.4 x 116.4 mm
- Input: 16
- Relay Output: 16
- Transistor Output: None
- AD: 10
- DA: 2
- High-Speed Input: 2
- High-Speed Output: None

Functions of Standard Version:
- Analog Quantity:
* AD: Input 0-10V.
* DA: The output is compatible. Connect G-, V+ is 0-10V output. Link G-, I+ is 0-20ma output.
- Communication Port:
* 1-way 232: 9-pin serial port definition: 2 (TXD send), 3 (RXD receive), 5 ground, support programming port protocol for Mitsubishi, download programs, connect various touch screens, etc.; 10 meters communication.
* 2-way 485: Interface definition: A, B, ground. Support programming port protocol for Mitsubishi, for Modbus rtu/RS protocol, can be connected to various touch screens, inverters, etc.; the longest communication distance is 1000 meters.
- High-Speed Pulse:
* High-speed input: Default 2 high-speed input. X0: 60khz; X 1: 10khz.

General Parameters:
- Model: LK3U-32MR
- Installation method: DIN35 rail or screw fixed
- Operating temperature: 0℃ to 50℃
- Storage temperature: 20℃ to 60℃
- Operating humidity: 10%RH~90%RH (no condensation)
- Air requirements: non-corrosive, no dust
- Working voltage: DC24V±10%
- Working current: Depend on the specific model, >1A
- Programming software: For GX-Developer/GX-Works2
- Maximum program step: 32000 steps
- Communication port 0: RS232: program download, HMI communication; programming port protocol, the default baud rate is 19200.
- Communication port 1: RS485: HMI communication, communication of various instruments; default programming port protocol, default baud rate 19200, optional protocol for MODBUS-RTU/RS/RS2.
- Communication port 2: RS485: HMI communication, communication of various instruments; default programming port protocol, default baud rate 19200, optional protocol for MODBUS-RTU/RS/RS2.
- Communication port 3: CAN: PLC expansion port, which can be connected to our producers' IO expansion module.
- Digital quantity input: DC24V NPN leakage pattern
- Digital quantity output: Relay: dry contact (AC250V/DC30V; 3A)
- Analog quantity input: 0-10V.
- Analog quantity output: Output is compatible. Connect G-, V+ is 0-10V output. Link G-, I+ is 0-20ma output.

Package Included:
- 1 x Set of PLC Controller