Plug & Drive ECU Chip Tuning Box Double PCB for Benzine Cars SUPER OBD2

Plug & Drive ECU Chip Tuning Box Double PCB for Benzine Cars SUPER OBD2

Description:
SUPER OBD2 Chip Tuning Box works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, SUPER OBD2 adjusts itself to the car, according to the drivers' habits and always keeps remaping the ECU to increase the performance of engine.

Certificates: CE / FCC / RoHS.

What does SUPER OBD2 make?
According to your driving habits, SUPER OBD2 makes new map in the car's computer ECU to increase the performance of your car. As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.

What is SUPER OBD2 Chip Tuning Box?
Super OBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

When it's plugged into OBD2 connector, it receives the information from the car's computer ECU. With the received data from ECU, it adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.

Super OBD2 Chip Tuning Box does not exceed the manufacturer’s requirements. It works only within the tolerance of the engine.

Super OBD2 finds out the hidden power of your car. Super OBD2 does not damage the engine and the car‘s computer ECU or not cause any negative effects to the car factory setting.

It does not change any of the settings permanently. To turn back to the car's original settings, just unplug Super OBD2 from OBD2 connector.
 
Super OBD2 finds out the hidden power of your car.
- Up to 35% more power
- Up to 25 % more torque

Easy to Use Super OBD2
Plug Super OBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on.

Super OBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, there might not be a need to make an additional adjustment. Super OBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then Super OBD2 adjusts itself to match your car perfectly.

Super OBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map.

The main difference between Super OBD2 Chip Tuning Box and Remapping tuning methods is that Super OBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. Super OBD2 is the cheap and safe type of tuning.

Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.

Super OBD2 is equipped with the engine protection function and 100% safe for your car engine.

Super OBD2 produced on the printed circuit board in SMD technology. Super OBD2 Chip Tuning Boxes are high quality.

Installation and Calibration:
1. Pull the Car Key out from the ignition.
2. Find OBD2 connector in your car and Plug in Super OBD2
3. Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4. Press the reset button for about 5 sec. After releasing the button, just wait for a while about 30-54 sec. (Super OBD2 will communicate and establish connection with ECU)
5. Start up the engine.
6. Super OBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus Super OBD2 will adjust itself to match your car perfectly for more fuel saving.

Each device available for LPG.

Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990.

OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union

Where located OBD2 connector in your car?
1. Driver's side, underneath dasboard, in the area under the steering column,
2. Driver's side, underneath dasboard,between the driver-side door and steering column area
3. Driver's side, underneath dasboard, between the steering column area and the center console
4. Driver's side, dashboard instrument/gauge area, between the steering column and center console
5. Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6. Center console, vertical surface left of vehicle centerline
7. Center console, vertical surface right of vehicle centerline or on passenger side of center console
8. Center console, horizontal surface in front passenger area.

Package Included:
- 1 x Super OBD2 ECU Chip Tuning Box
- 1 x User Manual