PP2000 LEXIA3 DIAGBOX V7.62 Code Reader Auto Scanner Actuator Test Car Diagnostic Tool

PP2000 LEXIA3 DIAGBOX V7.62 Code Reader Auto Scanner Actuator Test Car Diagnostic Tool

Highlights:
- Update by CD
- Now support 307!
- Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish,  Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
 
Hardware and Software Requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. If customer requires, we can prepare ready to work PC.
Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and take you much trouble.
 
LEXIA-3/PP2000 Description:
- It is compatible with cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
- It is compatible with most cars from 1995..If you have the two types of cars, please pay attention, please check with us first before purchase.
- Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
 
LEXIA-3/PP2000 Function:
 Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
 
1.Read Identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
 
2. Read Fault Codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
 
3. Clear Fault Codes
this function clears all stored fault codes and other diagnostic information.
 
4. Auto-Scan (Complete Car Scan/Test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
 
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
 
6. Actuator Test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
 
Package List:
- 1 x Main unit with extension OBD2 cable
- 1 x Long 9pin to USB cable
- 1 x Short 9pin to USB cable
- 1 x OBD2 cable
- 1 x 16pin to Clip Cable
- 1 x Instruction for Installation and Activation DVD for PP2000