QM300T 20Hz-300MHz Digital Sweep Generator Signal Generator Vector Network Analyzer VNA DC12V

QM300T 20Hz-300MHz Digital Sweep Generator Signal Generator Vector Network Analyzer VNA DC12V

Description:
QM300T digital synthesis sweep generator adopts direct digital synthesis technology and is controlled by a microprocessor. Built-in detector, no detector probe is needed, and it can measure the amplitude-frequency characteristics of any frequency band in the range of 20Hz~300MHz. When used with SWR bridge sold our store, it can complete the measurement of the antenna S11 standing wave ratio and other parameters in the frequency band. The frequency sweep mode can be set arbitrarily, such as logarithmic and dot frequency. The frequency value and amplitude value at the cursor position can be directly displayed. USB communication interface can be connected to a PC and controlled by a host computer. Support for Window XP, Window 7 (32-bit, 64-bit), Window 10. Test curves and data can be exported, PDF, JPG and other formats. It is suitable for production debugging, equipment maintenance, antenna and feeder testing.

Specifications:
- Equipment Name: QM300T Digital Sweep Generator
- Sweep frequency bandwidth: 20Hz-300MHz
- Sweep frequency: step 1Hz
- Logarithmic dynamic range: ≥75db
- Point frequency output power: 0.8dBm at 200MHz
- Communication interface: USB
- Signal interface: N type
- Power supply: DC12V
- Control software: WINNWT4 V4.08.02

Packing List:
1. One QM300T
2. One USB data cable
3. One set of 12V/1A adapter
4. Two N to SMA connectors
5. One set of SMA test cable
6.Materials (including PC software, instructions for use)

Note:
- Outdoor portable tests can be completed by configuring battery. Battery is not included.