RadioMaster BOXER 16CH 2.4GHz RC Controller Remote Controller 4IN1 Version with Left Hand Throttle

RadioMaster BOXER 16CH 2.4GHz RC Controller Remote Controller 4IN1 Version with Left Hand Throttle

Read before Purchasing:
- It is the accessories of RC models, not toys. Therefore, safety should come first. If you have any questions, please consult customer service or check the manual.
- Please comply with relevant laws when using this product. Flight in crowded areas is not allowed.
- About the battery and charger: Please charge the battery before using. Users who do not know how to wire and set up the charger must consult customer service, because incorrect settings can lead to serious injury. When the battery leaks or is damaged, please do scrap treatment, otherwise it will easily cause fire. Our store is not responsible for safety accidents caused by improper operation by users.

Technical Parameters:
- Model number: BOXER remote controller
- Size: 178 x 76.7 x 235mm/7 x 3 x 9.3"
- Weight: 532.5g/1.2lb
- Transmission frequency: 2.400GHz-2.480GHz
- Internal RF options: CC2500 multi-protocol/4-in-1 multi-protocol/ELRS 2.4GHz
- RF power: CC2500/4-in-1: 20dBm maximum; ELRS: 30dBm maximum
- Working voltage: 6.6-8.4V DC
- Open source firmware: For EdgeTX (remote control) / DIY-Multiprotocol-TX-Module (high frequency module) / ELRS
- Number of channels: up to 16 channels (depending on receiver)
- Display: 128*64 monochrome LCD display
- Joystick: V4.0 Hall Stick
- Compatible with external module: JR/FrSKY compatible module socket
- Protocols: All protocols supported by the multi-protocol version (see protocol list https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md)

Package Included:
- 1 x RC Controller
- 1 x Carry Bag
- 1 x USB Data Cable
- 1 x Wrench
- 4 x Springs
- 2 x Screws

Note:
- Battery is not included. 2S 6200 battery is recommended.