Raspberry Pi 3 Model B 1GB RAM Quad Core BCM2837 64bit Processor 1.2GHz CPU Starter Kit for DIY

Raspberry Pi 3 Model B 1GB RAM Quad Core BCM2837 64bit Processor 1.2GHz CPU Starter Kit for DIY

Features:
- Raspberry Pi 3 Model B 1GB RAM Quad Core 1.2GHz CPU
- Built on the latest Broadcom 2837 ARMv8 64bit processor, the new generation Raspberry Pi 3 Model B is faster and more powerful than its predecessors. With built-in wireless and Bluetooth connectivity, it becomes the ideal IoT ready solution.
- 1.2GHz QUAD Core Broadcom BCM2837 64bit ARMv8 processor
- BCM43438 WiFi on board
- Bluetooth Low Energy (BLE) on board
- 1GB RAM
- 4x USB 2 ports
- 40pin extended GPIO
- HDMI and RCA video output

Key Improvements from Pi 2 Model B to Pi 3 Model B:
- Next Generation QUAD Core Broadcom BCM2837 64bit processor
- Processor speed has increased from 900MHz on Pi 2 to 1.2Ghz
- BCM43438 WiFi on board
- Bluetooth Low Energy (BLE) on board
- Upgraded switched power source up to 2.5 Amps (can now power even more powerful devices over USB ports)

Specifications:
- Broadcom BCM2387 chipset
- 802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)
- 1GB RAM
- 4 USB ports
- 4 pole Stereo output and Composite video port
- Full-size HDMI for streaming and watching hi-definition video output at 1080
- 10/100 BaseT Ethernet socket to quickly connect the Raspberry Pi to the Internet
- CSI camera port for connecting the Raspberry Pi camera
- DSI display port for connecting the Raspberry Pi touch screen display
- Micro SD port for loading your operating system and storing data
- Micro USB power source
- 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (~10x the performance of Raspberry Pi 1)
- Integrated 802.11n wireless LAN and Bluetooth 4.1
- Clear Acrylic Case with Cooling Fan for Raspberry Pi 3 Model B
- Acrylic Clear Case
- Compatible with Latest Version Raspberry Pi 3 Model B
- Special design to install a cooling fan (size: 3x3cm)
- The cooling fan is DC 5V 0. 2A
- 1 set 3pcs Copper Heatsink kit With Thermal Pad for Raspberry Pi 3 Model B
- This is a heat sink cooling kit for Raspberry Pi 3 Model B.
- Size: 12x13x5.4mm,15x15x1mm
- US or EU or UK Power Supply adapter Charger 5V 2.5A For Raspberry Pi 3 Model B
- Input Voltage: AC100-240V 50/60Hz
- Output: DC 5.0v 2500mA (2.5A)
- Short Circuit Protection
- Overload Protection
- Consistent fixed switching voltage
- Internal Fuse for Extra Safety
- Micro USB power supply charging cable with ON/OFF switch For Raspberry Pi 3 Model B
- 3ft (1m) length
- RoHS Compliant
- Use for charging / powering the Pi. Not for data transfer use
- Fully tested to work with the Raspberry Pi 3 Model B
- 16GB Class10 48 Mb/s Micro SD TF Card NOOBS preloaded for Raspberry Pi 3 Model B
- Top quality branded memory card with speed up to 48 Mb/s Class 10
- Pre Installed with the latest NOOBS (New Out of Box Software) OS
- Plug and Play some minor network reconfiguration may be required
- Fully tested with Raspberry Pi 3 Model B
- For install NOOBS, the original package was opened, but we can guarantee this product is brand new.
- Black HDMI Cable 6FT 1.8M for Raspberry Pi 3 Model B
- Connects your Raspberry Pi to your HDMI display unit
- Gold-plated connectors for highest signal transfer rate and resistance in corrosion.
- Fully Compatible with new HDMI 1.4 specification and HDMI 1.3b or below.
- Supports 480i, 480p, 720p, 1080i, 1080p
- Fully tested to work with the Raspberry Pi 3 Model B
- Cable color: Black
- Cable Length: 1.8m/6FT
- 6.5ft 2M CAT5 RJ-45 Ethernet Network Cable for Raspberry Pi 3 Model B
- Compliance Standard: EIA/TIA 568B Category 5E
- Cable Type: UTP
- Connectors: 8P8P RJ45 Male to 8P8P RJ45 Male
- Color: Blue
- Length: 2M / 6.5FT
- Weight: 51g
- Fully tested to work with the Raspberry Pi 3 Model B

Note:
Regarding the size of the SD card:

There are customers complained about the size of the SD card shown in Windows system is much less. The reason is the Raspberry Pi disk image is formatted into three partitions. One is about 75Mbytes in size, it is formatted using the FAT32 file system and is the only part that Windows can see. The other two are formatted using a Linux file system.  A Windows system can't see these so as far as its concerned this space does not exist. This means that once the image is burned onto the SD card all Windows Operating system can see is the about 75MB FAT32 partition.

If you want to format the SD card back to the original size in windows, please follow the following instructions: Click here

Package Includes:
- 1 x Raspberry Pi 3 Model B Brand New 2016 Wifi + Bluetooth 64bit 1.2GHz QuadCore
- 1 x Clear Acrylic Case with Cooling Fan  
- 1 x 1 set 3pcs Copper Heatsink kit With Thermal Pad  
- 1 x Power Supply adapter Charger 5V 2.5A  
- 1 x Micro USB power supply charging cable with ON/OFF switch
- 1 x 16GB Class10 48 Mb/s Micro SD TF Card NOOBS preloaded
- 1 x Black HDMI Cable 6FT 1.8M  
- 1 x 6.5ft 2M CAT5 RJ-45 Ethernet Network Cable