• RF Signal Generator Frequency Generator 10MHz-15GH On-chip Amplitude Control Frequency Sweep LMX2594
  • RF Signal Generator Frequency Generator 10MHz-15GH On-chip Amplitude Control Frequency Sweep LMX2594
  • RF Signal Generator Frequency Generator 10MHz-15GH On-chip Amplitude Control Frequency Sweep LMX2594

RF Signal Generator Frequency Generator 10MHz-15GH On-chip Amplitude Control Frequency Sweep LMX2594

Availability: In stock, usually dispatched in 1 business day

  • Price:$350.85
  • Price in reward points: 3509 Reward Points: 35
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $343.83 $336.82 $326.29 $312.26 Contact US
Quantity:

RF Signal Generator Frequency Generator 10MHz-15GH On-chip Amplitude Control Frequency Sweep LMX2594  

Description:

The product provides a USB cable, does not provide codes and schematics, and can be used as a local oscillator (low noise).

LMX2594 is a high-performance broadband synthesizer that can generate any frequency in the range of 10MHz to 15GHz without the use of an internal doubler, eliminating the need for sub-harmonic filters. A high-performance PLL with a quality factor of -236dBc/Hz and a high phase detector frequency enable very low in-band noise and integrated jitter. The high-speed N divider has no pre-scaler, which significantly reduces the amplitude and amount of spurs. There is also a programmable input multiplier that reduces integer boundary spurs.

LMX2594 allows users to synchronize the output of multiple devices, and can be applied in situations where a delay between input and output is determined. The frequency ramp generator can synthesize up to 2 ramps in the automatic ramp generation option or manual option to achieve maximum flexibility. The fast calibration algorithm can accelerate the frequency to more than 20μs. LMX2594 adds support for generating or repeating SYSREF (compliant with JESD204B standard), making it an ideal low-noise clock source for high-speed data converters. Fine delay adjustment (9ps resolution) is provided in this configuration to account for the delay difference of the board traces.

The output driver in the LMX2594 provides up to a certain output power when the carrier frequency is 15GHz. The device uses a single 3.3V power supply and has an integrated TI industry very low noise LDO, eliminating the need for onboard low noise LDO.

PC auxiliary software and communication protocol download: (using PL2303SA driver chip)
Link: https://pan.baidu.com/s/1FiiLOkESa_rw9ss7UEphOw Password: ons5

USB driver download:

Link: https://pan.baidu.com/s/1OK6F3ca1tbbfwr7apYIj3Q Password: ax4j

Features:
1. 10MHz to 15GHz output frequency
2. Has a phase noise of -110dBc/Hz in the case of 100KHz offset and 15GHz carrier
3. At 7.5GHz, with 45fs RMS jitter (100Hz to 100MHz)
4. Programmable output power
5. PLL main specifications:
* Quality factor: -236dBc / Hz
* Nominal 1 / f noise: -129dBc / Hz
* Maximum phase detector frequency
* 400MHz integer mode
* 300MHz fractional mode
* 32-bit fractional N divider
6. Use programmable input multipliers to eliminate integer boundary spurs
7. Achieve output phase synchronization across multiple devices
8. Support for SYSREF with programmable delay of 9ps resolution
9. For Application of FMCW frequency ramp and chirp capability
10. Less than 20μs VCO calibration speed
11.3.3V single power supply operation

Applications:
1. 5G and millimeter wave wireless infrastructure
2. Test and measurement equipment
3. Radar
4. For MIMO
5. Phased array antenna and beam forming
6. High-speed data converter clock (supports JESD204B)

Package Included:
- 1 x Set of RF Signal Generator

Operation:


PC Software:

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha