Robotbit DIY Electronic Starter Kit Learning Kit For LEGO Makecode Kittenblock Experiment Kit

Robotbit DIY Electronic Starter Kit Learning Kit For LEGO Makecode Kittenblock Experiment Kit    

Description:
The Robotbit electronics kit can be used by training institutions or students. The adapter board features a separate design and is equipped with a 3-pin foolproof module. It is convenient for Microbit users to get started quickly. When not using an adapter board, Robotbit can be connected via DuPont cable. This electronic kit guarantees the safety and stability of training courses, as well as the flexibility of DIY production.

Features:
- Amazing starter kit for micro: bit
- Support programming for Kittenblock (based on Scratch3) and Makecode
- With Robotbit base fits for LEGO seamless integration
- Detailed graphic tutorials make you quickly to start programming for Microbit
- Support for Scratch graphical programming. You can quickly play various electronic modules without code base
- Robotbit expansion board is compatible with modules with pin headers on the market, and Robotbit_shield expansion board is compatible with ph2.0 3PIN interface modules and energy magic blocks on the market
- Easy application thanks to its compact size. Including I2C, users can use more than 9 modules at the same time
- Support Bluetooth and serial port online debugging in programming software. Users can also use mobile phones and tablet apps for online programming control. (Note: Bluetooth adapter needs to be purchased separately. Bluetooth communications does not support offline download.)
- Supports for graphical blocks to Micropython code, allowing you to seamlessly progress from novice
- Strong expansibility and compatibility make you no longer worry about the module experience
- With interfaces, Robotbit can driver 8-way servos, 4-way motors, 2-way 28byj stepper motor, support personal robotic DIY
- With compartment for power supply and interface for external power supply, it enables stronger driving capacity

Advantages:
- Graphical Programming: Support for Kittenblock Scratch 3.0-based, Makecode, Micropython programming. We can understand the principles of programming through graphical programming, and then translate them into code patterns to understand programming thinking and code structure.
- User-Friendly Design: A Robotbit Shield expansion board has been added to the kit. On the basis of retaining the original DuPont line connection, a foolproof interface has been added, and there is no need to worry about children connecting wrong line in the classroom. With protective base for LEGO, electronics and mechanics are easily combined, adding endless possibilities for creation.

Robotbit Shield Expansion Board:
- 8 x ph2.0 3p interfaces
- 2 x ph2.0 4p interfaces
- 1 x I2C pin header interface (output voltage 3.3V)
- 3 pin header module interface connects to module with pin headers
- 1 dip switch to select the voltage of pin header to be 3V output or 5V output
- The back of the expansion board is a female connector for plugging Robotbit

Expansion DIY Experiments:
- Ultrasound following mode
- Magnetic induction to turn off light
- Showing potted mood
- Water drop smart drying rack
- Knob controlling RGB
- Fire pioneer

Package Included:
- 1 x DuPont Line Female to Female 10pcs per Pack
- 4 x 25cm 3PIN Foolproof Cables  
- 1 x Transparent Plastic Storage Box
- 2 x Motors
- 1 x Fan Fit For LEGO
- 1 x Grey Servo
- 1 x Silicon Protective Sleeve For Microbit
- 1 x Robotbit Shield Expansion Board
- 1 x Robotbit Expansion Board + Base
- 1 x Rotary Potentiometer (3PIN Anti-Reverse Connection)
- 1 x Flame Sensor (3PIN Anti-Reverse Connection)
- 1 x Photosensitive Module (3PIN Anti-Reverse Connection)
- 1 x Soil Sensor (3PIN Anti-Reverse Connection)
- 1 x Tongue Tube Magnetic Field Sensor (3PIN Anti-Reverse Connection)
- 1 x Water Level Sensor (3PIN Anti-Reverse Connection)
- 1 x USB Data Cable 1M
- 1 x Ultrasonic Module

Technical Parameters:
- Working Voltage: 5V via USB data cable
- Working Current: Smaller than 1A
- Communications Way of Main Board: Through USB data cable or Bluetooth transmission (Extra Bluetooth adapter is needed for Bluetooth transmission)
- External Power Supply Input For KF128 Terminal: 3V-5V
- Programming Ways: Support for Kittenblock (based on Scratch 3.0)/Makecode/Mu editor

Note:
- Battery is not included in the package.
- If the board for Microbit is needed, please contact us to pay extra money.
- Thanks to a protection chip, Robotbit provides protection when it is over-charge, over-discharge.

Precautions:
- It is suitable for users over 14 years old. Children 8-14 years old should use this product under the supervision of a parent or teacher.
- Please follow the official guide to wire the circuit.
- Please not use it on a metal surface or on the objects that are conductive to avoid short-circuit problem.
- To avoid short-circuit, please not use it in a wet and dry, or other places with water.
- Please keep it out of the reach of kids. Do not swallow circuit boards or other small objects on the product.