SE5004L 5.8G Signal Amplifier Module FPV Image Transmission Remote Control Range Amplifier Board 2W

SE5004L 5.8G Signal Amplifier Module FPV Image Transmission Remote Control Range Amplifier Board 2W

Parameter:
1. Power supply: 6-23V (at 1000mA @ max power output, with DCDC module inside, you can also directly use a fixed voltage 5V power supply, welding wire from another point)
2. Gain: 25DB @ 5800MHz
3. Size: length * width * height (70mm * 50mm * 20mm), includes a protruding SMA interface; length * width * height (50mm * 50mm * 20mm), not includes SMA interface
4. P1dB> 30dBm-1W @ 5800MHz
5. Working frequency: 5100-5900MHz
6. Input and output impedance: 50Ω

Description:
-The SE5004L is a 5GHz power amplifier offering high linear power for wireless LAN applications. The SE5004L incorporates a power detector for closed loop monitoring and control of the output power.
-The SE5004L offers high integration for a simplified design, providing quicker time to market and higher application board production yield. The device integrates the input match, the inter-stage match, the output match, the power detector with 15dB of dynamic range and a 3.8GHz notch filter. Only 6 external decoupling capacitors are required to complete the design.
-For wireless LAN applications. the device meets the requirements of IEEE802. 11a & 802. 11n, and delivers approximately 26dBm of linear output power at 5V.
-The SE5004L integrates temperature compensated bias voltage generators. A 2.85V reference voltage on VREF is all that is required to enable or disable the power amplifier.

Features:
-High output power amplifier-26dBm at 5V.
-External analog reference voltage (V REF) for maximum flexibility.
-Buffered, temperature compensated power detector.
-3% EVM, @26dBm, 64 QAM, 54 Mbps 32 dB gain.
-Lead free, RoHS compliant, halogen free MSL3 package.
-20 pin 4mm x 4mm x 0.9mm QFN.

Applications:
-DSSS 5 GHz WLAN (IEEE802.11a)
-DSSS 5 GHz WLAN(IEEE802.11n)
-Access Points, PCMCIA PC cards
 
Package Included:
1 x Amplifier Board