Simplayer LED Display Dashboard for T300 599 Non-destructive Modification of F1 Steering Wheel Rim

Simplayer LED Display Dashboard for T300 599 Non-destructive Modification of F1 Steering Wheel Rim

Description:
MPCU-6D is an LED display module based on the PCU-6D for McLaren. During the driving simulation of a racing car, it provides the driver with information about the dynamics of the car.

The module can be fixed in the cockpit for use. Its built-in USB port allows it to be used separately.

It can also be used as a display module by embedding a multi-function steering wheel with reserved wiring.

Central Digital Tube:
* One seven-segment digital tube digital display. It displays the gear by default.
* The display section size is 14.22mm high and 8mm wide.

Digital Tubes on the Left and Right:
* There are four fourteen-segment digital tubes on the left and right sides. These digital tubes can be used for multi-functional displays.
* The display size is 10.16 mm high and 6 mm wide.
* In normal driving mode: the default display is the speed on the left, and the difference between the current and fastest laps on the right side.
* When the ABS LEVEL, TC LEVEL, and Brake Bias values of the vehicle change, the digital tubes will switch to display the currently changed parameter adjustment. At this time, the left digital tubes will display the item being adjusted, and the right digital tubes will display the corresponding value. After 1s, the digital tubes will automatically switch back to the default driving state.
* When DRS can be enabled for a formula car, the digital tubes on the right will switch to display the ERS electric quantity. The digital tubes on the left will still show the current speed. After the DRS is turned off, the digital tubes on both sides will flash to show the highest speed record of the DRS segment + the remaining power of the ERS.
* When the car crosses the line, the digital tubes on both sides will switch to display the last lap time. The display format is: 00.0000.00 (Hours. Minutes. Seconds).

Warning Lights on the Left and Right:
* There is a red, blue, and yellow light on the left and right sides to warn of the special status of the car and the event.
* Blue light on the right side stays on: TC activated; Red light on the left stays on: ABS activated.
* Yellow light on the left is flashing: DRS can be enabled; Blue light on the left stays on: DRS is on.
* Warning lights of the same color on both sides flash together to indicate the corresponding track flag: yellow, red, blue.

Top Strip Light:
* There are 5 green LEDs, 5 red LEDs, and 5 blue LEDs.
* The lights are used to show a rotational speed ratio of 40%-100%.

Input Interface:
* Type-C USB 2.0 port.

Package Included:
* 1 x LED Display Module

Packaging Details:
* Weight: 0.55kg

Note:
* The MPCU-6D needs to be used with Simhub software. Essentially, it's Simhub's "custom serial device".