STM32 F103VET6 V5 Development Board Learning Board 3 inch LCD Display JLINK Combo

STM32 F103VET6 V5 Development Board Learning Board 3 inch LCD Display JLINK Combo

Features:
- Embedded development board small and compact, by senior development engineer design. At the time of preparation of routine, which not only created a large number of basic routines, the more the STM32 for final engineering field, created more than 20 based on ucos ucugi advanced application routines. Not only for beginners. Also meet the engineering requirements of users. Many entry-level market STM32 development board only monotony of similar basic routines. If you are a have high request for their users, choose struggle, will make you have the feeling of progress.

On-board resources
A JTAG debug interface
. A power leds (orange), three status leds (blue)
. 1 RS - 232 support 3 line of ISP. (connected to the computer need to mother on mother crossover cables)
1. The TTL asynchronous communication interface.
1 a CAN bus interface
1 RS - 485 bus interface
1. The camera interface
A PS / 2 keyboard interface
1 a CAN bus interface
. A usb SLAVE mode interface at full speed. (the interface can be used as a power supply interface, also as a USB communication interface).
. A Micro SD card socket (TF), interface USES the SDIO four ways.
. 1 LCD interface, the use of unique FSMC 16-bit interface mode control, can and struggle of 2.4 inch, 3 inch, 4.3 inch, 5 inch, 7 inch LCD module connection.
. A SPI bus control SST25VF016B serial FLASH (2 m BYTES)
. 1 RTC back-up battery with the battery
. 1 ENC28J60 SPI bus control network interface (10 m)
. 1 I2C bus control FM radio module (TEA5767)
1. The SPI bus control VS1003 MP3 audio decoding circuit.
A voice input interface.
A voice output interface
1 a CAN bus interface
. One way of SPI NRF24L01 2.4 G wireless module interface.
1. I2S interface
. General GPIO interface
. The onboard three user defined tiny buttons
A reset button
1 DC5V input interface
The board size: 136 mmx118mm.

Package list:
- STM32 V5 development board x1
- 3 inch (400x240) LCD touch screen x 1
- Jlink V8 simulator x 1
- Cross cable x 1
- USB cable x 1
- DVD x 1
- Transparent cover board x 2