| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $108.65 | $106.44 | $103.11 | $98.67 | Contact US |
GBSC Converter Control RGBS VGA Scart Ypbpr Signal to VGA HDMI-compatible for SEGA Dreamcast PlayStation2 NGC
$83.92
Mini Mister Game Console Cyclone V SoC FPGA Development Board with 32GB TF Card for Retro Games
$239.43
SimPlayer Pair of Magnetic Paddle Shifter Game Simulator DIY Accessory for MOZA R5 R3 ES ESX
$14.57
SXP PC Racing Game Handbrake Video Games Accessory Compatible with Simagic Mini MOZA R5 R9
Features:
- No wear because the game handbrake is designed with 3 bearings
- Notch base enables large installation space
- Customized accessories, frame-less
- Only 2 screws are required for installation
- The racing handbrake can be used vertically and horizontally
- Driver-free: USB handbrake is plug-and-play
- The style and size of the handle can be changed
Package Included:
- 1 x Handbrake
Installation and Debugging:
- Tips: Due to the different installation methods and using environment, users need to prepare M8 hexagon socket head cap screws and nuts before installation.
- Installation Tutorial:
1. Unpack.
2. Remove the 4 screws and spring washers from the base of the handle.
3. The base of the handle is snapped into the main body and aligned with the 4 screw holes on both sides (If it is too difficult to stuff in, you can loosen one of the screws on both sides of the joint bearing. Remember to tighten the screw after installation).
4. Install the 4 screws and 4 spring washers that were removed before. Finally, tighten these accessories.
5. Install the fixed screw (the back): Put the screw that needs to be fixed in the back from the side first and tighten it.
6. Install the fixed screw (front): put the screw into the front notch to install and tighten.
7. Screw the handle of the handbrake, connect the aviation plug to the main control, connect the computer, map the axis, and you can enjoy games.
- Adjust dead zone of games: Use DiView to adjust the dead zone of the device.
- The strength bar in the game is not cleared and does not return to position:
1. You can use DiView to set the dead zone.
2. Remove the screw of the main control box, remove the cover, look at the white motherboard, find the blue cuboid potentiometer, and rotate the potentiometer clockwise with a flat screwdriver until the force bar returns to zero. Install the lid of the main control.
