| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $20.58 | $20.16 | $19.53 | $18.69 | Contact US |
SFLY SP10F Offline Programmer High-speed Flash Programmer for SPI FLASH/EEPROM and Mass Production
$83.72
SFLY SP10B High-speed Flash Programmer Eeprom Programmer for SPI FLASH/EEPROM & for Mass Production
$46.41
SFLY SP10A High-speed Flash Programmer Eeprom Programmer for SPI FLASH (not for Mass Production)
$40.58
SyncMOS MSM9066 MCU Programmer Taiwan-Made MCU Emulator with Cable for On-Line and Off-Line Uses
Download Software:
http://www.syncmos.com.tw/technical.php?pid=1
Four Programming Modes:
1. Online ISP: MSM9066 needs to be connected to a PC, and connected to MCU through Rx and Tx to program. Crystal oscillator frequency needs to be set according to the crystal oscillator frequency used by your target board.
2. Offline ISP: The code to be flashed can be uploaded to the MSM9066 first, and then you can connect to the MCU through Rx and Tx without connecting to the computer. Crystal oscillator frequency needs to be set according to the crystal oscillator frequency used by your target board.
3. Online ICP: MSM9066 needs to be connected to a PC, and the MCU is burned through the OCI_SCL and OCI_SDA.
4. Offline ICP: The code to be flashed can be transferred to the MSM9066 first, without connecting to a computer, and the MCU can be programmed through the OCI_SCL and OCI_SDA.
ICP Programming:
1. MSM9066 needs to be connected to your target board through OCI_SCL and OCI_SDA. Please connect the OCI_SCL, OCI_SDA, VCC and GND of the target board to MSM9066. Set the desired item, click <performed automatically> , and you can use ICP programming.
2. When OCI_SCL, OCI_SDA and Reset pin are configured as GPIOs, it will affect the ICP programming and cannot enter ICP mode. ICP mode can only be entered when the IC is just powered on. To use the MSM9066 in this case, follow these steps:
(1) Turn off the power of the target board first, and connect the OCI_SCL, OCI_SDA, VCC and GND of the target board to the MSM9066.
(2) Press <performed automatically>, the interface will display "Detecting".
(3) At this time, turn on the power of the target board. After the programming is completed, the interface will display the corresponding information.
The following series are supported. Please consult customer service for more details:
~59 series:
SM5964, SM5964A, SM59264, SM59128, SM5952, SM5953, SM5964B, SM5958, SM5952E, SM5958 and SM5954.
~59A series
SM59A16U1 and OB59A128A1.
~59R series
SM59R02A1, SM59R03A1, SM59R04A1, SM59R04A2, SM59R05A3, SM59R09A3, SM59R16A3, SM59R05A5, SM59R09A5, SM59R16A5, SM59R05G6, SM59R09G6, SM59R16G6 and SM59R02G1.
~39R series
SM39R2051, SM39R4051, SM39R02G1, SM39R04G1, SM39R08A2, SM39R12A2, SM39R16A2, SM39R16A6, SM39R08A5, SM39R08A3, SM39R16A3, OB39R32T1, OB39R62T1, OB39R32T2 and OB39R62T2.
~39A series
SM39A16M1, OB39A16D1, OB39A08T1, OB39A16T1, OB39A16D2 and OB39A.
Package Included:
- 1 x Emulator
- 1 x Cable
